SMB Posted November 17, 2016 Share Posted November 17, 2016 (edited) Thanks to all for the suggestions. Edited November 21, 2016 by SMB (see edit history) Link to comment Share on other sites More sharing options...
1927Chevy Posted November 18, 2016 Share Posted November 18, 2016 UX-3 http://www.ebay.com/itm/STROMBERG-CARBURETOR-UX-3-1927-1929-Studebaker-Big-6-1928-Dodge-Senior-six-ew-/322325139566?hash=item4b0c13506e:g:-9sAAOSw5VFWIXYZ&vxp=mtr Link to comment Share on other sites More sharing options...
1927Chevy Posted November 18, 2016 Share Posted November 18, 2016 (edited) http://www.vintageandclassicreproductions.com/CARB-UX2.jpg Edited November 18, 2016 by 1927Chevy (see edit history) Link to comment Share on other sites More sharing options...
1927Chevy Posted November 18, 2016 Share Posted November 18, 2016 (edited) The Carburetor Shop LLC use OX-2 (2) Replace the entire carburetor with a similar model. An example might be the Stromberg UX-2. The UX-2 (zinc) replaced the TX-2 (also zinc), which replaced the OX-2. The OX-2 is brass. Another example would be using a brass 1926~1928 Buick Marvel to replace a 1929 Buick Marvel (zinc). http://www.thecarburetorshop.com/Zinccastings.htm Edited November 18, 2016 by 1927Chevy (see edit history) Link to comment Share on other sites More sharing options...
JustHarry Posted November 18, 2016 Share Posted November 18, 2016 i have a tillotson jr5a on my car. once tuned good it runs well and returns acceptable mileage Link to comment Share on other sites More sharing options...
keninman Posted June 15, 2017 Share Posted June 15, 2017 On 11/18/2016 at 5:03 AM, JustHarry said: i have a tillotson jr5a on my car. once tuned good it runs well and returns acceptable mileage JustHarry, do you have some pictures of how you mounted this carb? Link to comment Share on other sites More sharing options...
JustHarry Posted June 18, 2017 Share Posted June 18, 2017 i have an adapter which just turns the mounting flange 90 degrees just bolts up then 1 Link to comment Share on other sites More sharing options...
keninman Posted June 18, 2017 Share Posted June 18, 2017 7 hours ago, JustHarry said: i have an adapter which just turns the mounting flange 90 degrees just bolts up then Could I get some pictures so I can see it. I just cannot picture how to hook up the throttle to it. Link to comment Share on other sites More sharing options...
JustHarry Posted June 24, 2017 Share Posted June 24, 2017 because my car is right hand drive the throttle linkage goes over the top of the motor so is completely different to what you will be doing 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now