Hyperkentaboy Posted February 11, 2016 Share Posted February 11, 2016 Hi.Im going to replace the seal on my steering pump.How do i do this.I have disassembled the pump but can't get the axis out./kenny Link to comment Share on other sites More sharing options...
Bhigdog Posted February 11, 2016 Share Posted February 11, 2016 I suggest you refer to your shop manual. Or did you take your precision machined pump apart without the manual that would show you what to check for and how to correct any problems? ...................... Bob 1 Link to comment Share on other sites More sharing options...
Hyperkentaboy Posted February 12, 2016 Author Share Posted February 12, 2016 First i diden't find the pump in my manual but arter some searching i found it. Thx alot for helt. Link to comment Share on other sites More sharing options...
Bhigdog Posted February 12, 2016 Share Posted February 12, 2016 You are welcome. BTW, All of the O rings, seals, bearings, etc are stock items available from any good bearing supply. Don't waste money buying a kit from somebody. Also by the way, the gaskets are easily made by yourself. Also BTW, take notice that there are two small steel spacer rings in the gasket betweenbetween the pump and tank. Also, do use gasket cement on that gasket..........Bob Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now