rodneybeauchamp Posted February 11, 2016 Share Posted February 11, 2016 Hi, has anyone fitted the front steel brake pipe on 63 Riviera. Have had new pipe professionally made to my original but it seems very difficult to refit. Body still on and car on stands. Any clues on this one? Link to comment Share on other sites More sharing options...
flh73 Posted February 13, 2016 Share Posted February 13, 2016 Most likley you will have to manipulate the pre bent brake line to fit, then once its where it should bre bend it back to original. Paitience for sure. Link to comment Share on other sites More sharing options...
rodneybeauchamp Posted February 13, 2016 Author Share Posted February 13, 2016 Hi, you are so right, patience and persevere, bit by bit. Fit RH end then clip, then centre clip then LHS. What a milestone, as it seems like it is all going back together. And tackle it when you have plenty of time and no other interruptions. All done, the rest should be ok. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now