Guest Posted January 29, 2016 Share Posted January 29, 2016 I'm trying to find a source for the (4) rubber bushing to fit this piece for my '38. I can't seem to find a listing for the correct terminology for this piece. My '38 Plymouth Parts Catalog doesn't include this. It is some type of primitive anti-sway system. The larger plates fit over the front axle and bolt it to the front leaf springs. The rear mount brackets attach to the frame near the rear of the front leaf spring perch.Any and all input is appreciated.Greg Link to comment Share on other sites More sharing options...
JACK M Posted January 29, 2016 Share Posted January 29, 2016 Maybe you could make these bushing out of poly or UHMW. Link to comment Share on other sites More sharing options...
Guest Posted January 29, 2016 Share Posted January 29, 2016 Jack, if they aren't available commercially that's what I'll do.Thanks, Greg Link to comment Share on other sites More sharing options...
Hudsy Wudsy Posted February 14, 2016 Share Posted February 14, 2016 Just for the heck of it, I Googled, "rubber bushings by size" and got some results. Here's a link to a Moog site: http://aftermarket.federalmogul.com/en-US/Technical/Documents/Rubber%20Bushings%20by%20Dimension.pdf Link to comment Share on other sites More sharing options...
Guest Posted February 14, 2016 Share Posted February 14, 2016 Thanks Hudsy. I've sent the bore and shaft dimensions to Daystar Suspension recommended by a friend with a Jeep shop. They think they can do it. Fingers crossed...... Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now