1941 Posted October 8, 2015 Share Posted October 8, 2015 After many tours with my LC , I now have problems . I noticed that the prior restorers used black electrical tape to hold the threaded rods from the carb choke and throttleand they have now separated. WHAT goes in this joint ? Link to comment Share on other sites More sharing options...
Ken/Alabama Posted October 8, 2015 Share Posted October 8, 2015 There is a steel rod from there to the engine bay where it is coupled via a rubber connector to another rod that goes to the carburetor Link to comment Share on other sites More sharing options...
1941 Posted October 8, 2015 Author Share Posted October 8, 2015 YES as I had stated, everything is there (including the threaded steel rods) except the connectors. What do they look like and where can I buy them? Link to comment Share on other sites More sharing options...
b6vt Posted October 8, 2015 Share Posted October 8, 2015 Try Boos-Herrell, They have these and they are reasonable.They advertise with the club. Glenn Lorei ( b6vt) Link to comment Share on other sites More sharing options...
Mssr. Bwatoe Posted October 8, 2015 Share Posted October 8, 2015 Open up the crimp slightly, get a short piece of vacuum hose, slip it over the rod..recrimp..I would app some silicone sealer as well....or jb weld the damn thing in place..test and mark to correct position first..funny bends in those things..or take a photo of the linkage and we will see if we have one... Link to comment Share on other sites More sharing options...
1941 Posted October 8, 2015 Author Share Posted October 8, 2015 I DO have good connectors under the hood.The connection I (and Jeff) are talking about is under the dashI will try Jeff's remedy Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now