Guest Steeler nick l Posted September 1, 2015 Share Posted September 1, 2015 Ok folks I have a stock 63 rivi having issues putting ralley wheels on it .I have a set where the( center whole for the center R emblem goes threw is the small hole ) have an issue where they hit a ring at backing plate the outer rim beed does that is..I have another set I where two wheels have a larger opening where the center cap goes and there's more of a bend in the painted spoke area those fit the rear drum and solve that issue so what gives please any info welcomed I've built a lot of hotrods and kustom new to rivi world..note my 63 is stock with dynaflow Link to comment Share on other sites More sharing options...
RivNut Posted September 1, 2015 Share Posted September 1, 2015 (edited) Read Tom's post #12 in this thread. You'll probably figure out what you have and see what you need to do to make them work. http://forums.aaca.org/topic/261680-65-wheels/ You'll probably find answers for a lot of your questions if you'll search the archives before posting a question. There are very few new questions being asked and lots of answers to the old questions in the archives. Ed Edited September 1, 2015 by RivNut (see edit history) Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now