Jump to content

WTK hub thread sizes


ArticiferTom

Recommended Posts

Been trying to get hub puller and cannot sort out if trucks ie. Grahams had 2 3/8 x16  and 2 7/16 x16 TPI . My hubs threads OD is 2.350 and at bottom of thread is about  2.240 .

                                                                 Thank you  Tom

Link to comment
Share on other sites

  • 2 weeks later...

Tom, I will check sizes on my pullers today. I have a 30, 31, and 32 truck. Do you know the model of your truck and are front and rear hubs the same size ? This info can help sort this out. Also a friend of mine said they met you in Macungie and that you may need some help with headlights. I may be able to help.

Link to comment
Share on other sites

Hello George (assuming) . Yes my truck is in my avatar pic a'31 Dodge / Graham the thread are same front and back at 2 3/8x16 tpi . I had purchased  a new McMurtry puller already . Put may be interested in an original .

  Was your friend the owner of the '29 dodge sedan who was looking for a puller and if so did he get the one we found from the  vendor . 

  I am looking to swap or buy set of headlights I have the seal beam Guide type on the truck now . I'am in contact with another '31 dodge owner now he saying , they are Twi-lite depressed beam two bulbs and metal not chrome about 9 3/8 or 8 7/8 lens (needed to check ) . Also need to get proper tail light .

Link to comment
Share on other sites

Thanks for the offer ,but I did get one . Not sure if it was Rich with Blue '29 did not know it as Standard Six . He said his measured 2 1/4" and me and Norm found one on table about 4 or 5 vendors down from your setup.  We went back and gave him the vendors card, he was going to find him when we left .

    Hey , Doug remember the booklet I bought . Well I contacted the guy in back with the other uf-10 pickup , his was only about 200 serial numbers from mine. When I called him Sunday ,he was a bite taken  back . He did not know about the article being republished in DBC book . He first words where IT'S Not FORSALE . When I said I already have one he offered to help anyway he could . Claims he has not run truck in 10 years and offered to photo any parts I had questions on ,as none of his photo he has where taken digitally .I think he has had the truck for almost 40 years .This will help me greatly !

 

                                                                                                           Tom

Link to comment
Share on other sites

Got the pics from Glenn . It definitely helped me disassemble my frozen tire lock and showed me some lights need to get what I saw verified . I pm'ed George on it .

  On another note with brakes  all removed I send every thing to Hagen's in Washington for sleeve and reline . Said about 5-7 working days .

  Is this Budds Creek something special for Dodges or trucks ?

                                                                              Tom

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...