Machine Gun Posted May 27, 2015 Share Posted May 27, 2015 Hi All: My 1964 Skylark carburetor is missing a proper air inlet filter for the choke unloader piston. Someone had stuffed steel wool in there, and I want to replace it with a proper filter. What's the proper material to use for the filter? The carb is a Rochester 2GV. Thanx,Jim Link to comment Share on other sites More sharing options...
ssmock Posted June 2, 2015 Share Posted June 2, 2015 I bought a filter for a small 2 cycle engine and cut it to fit the space in the 2GV Link to comment Share on other sites More sharing options...
Machine Gun Posted June 3, 2015 Author Share Posted June 3, 2015 Thanx for the tip. I was hoping to find out what they originally used so that I would get the proper air flow so that the choke would pull off properly. I'm guessing it was some type of felt. No biggie, I'll figure it out. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now