Rogillio Posted May 23, 2015 Share Posted May 23, 2015 My 26 DB has puematic wiper motor. Someone has replaced the original vacuum tank with an electric fuel pump. The wiper motor gets its pressure from the port on the carb by the intake manifold.....which is where the vacuum tank would normally connect.Where would the wiper get its pressure if the vacuum tank was connected to that carb port? Link to comment Share on other sites More sharing options...
frank29u Posted May 23, 2015 Share Posted May 23, 2015 On my '29 Plymouth, the wiper is connected to the intake manifold. The vacuum tank is connected to the oil pump. This is correct set-up for Plymouth. frank Link to comment Share on other sites More sharing options...
nearchoclatetown Posted May 23, 2015 Share Posted May 23, 2015 NO pressure, wipers are vacuum. Wipers and vacuum tank can be hooked to the same port. Link to comment Share on other sites More sharing options...
Rogillio Posted May 23, 2015 Author Share Posted May 23, 2015 NO pressure, wipers are vacuum. Wipers and vacuum tank can be hooked to the same port.Got it. Thanks. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now