Guest dbenzing Posted July 14, 2012 Share Posted July 14, 2012 Hi Mark,Just wondering what's the status on any parts you wish to sell. I am still looking for:1. Passenger front door lock cylinder2. Crank hole cover3. Choke cable knob I'm trying to complete my 34 DR Sedan before putting it up for sale.Thanks, Davedbenzing@ix.netcom.com408-265-4842 Link to comment Share on other sites More sharing options...
Guest Jen_ Posted July 14, 2012 Share Posted July 14, 2012 was contacted by PM and replied what I was interested in however I havent recieved a response since . Jen Link to comment Share on other sites More sharing options...
Guest cadaber Posted July 14, 2012 Share Posted July 14, 2012 Sorry...I drove the car back from Louisiana and was only home two days and now I'm in Alaska until the 22nd. Not ignoring any of you, I just travel quite extensively and haven't had an opportunity to start pulling parts off. I don't want to promise anyone any parts until I'm sure that I have them and they are in a descent amount of shape to be used. Cheers,Mark Link to comment Share on other sites More sharing options...
Guest cadaber Posted July 14, 2012 Share Posted July 14, 2012 Oops...towed the car back, not drove. I will do my best to get to the car when I get back on my days off. Mark Link to comment Share on other sites More sharing options...
Guest Jen_ Posted July 14, 2012 Share Posted July 14, 2012 Oops...towed the car back, not drove. I will do my best to get to the car when I get back on my days off. Markno worrys by me was thinking maybe something had happened to youJen Link to comment Share on other sites More sharing options...
Guest cadaber Posted July 14, 2012 Share Posted July 14, 2012 I am active duty Army so I am always traveling all over the place. Makes it tough to get to my projects. Hopefully I will have some time again soon. I did check the doors and they suffered a lot of rust on the bottom portions. They can be repaired, but will take some work. Link to comment Share on other sites More sharing options...
Guest cadaber Posted July 14, 2012 Share Posted July 14, 2012 Dave,I have the choke cable (not sure on the condition yet) and the crank hole cover (metal is in good shape) and as for the lock cylinder, I will have to look when I get home. I don't recall if it was there. Mark Link to comment Share on other sites More sharing options...
knobless Posted July 14, 2012 Share Posted July 14, 2012 Dave,I have the choke cable (not sure on the condition yet) and the crank hole cover (metal is in good shape) and as for the lock cylinder, I will have to look when I get home. I don't recall if it was there. Markwhat are you going to be asking for the rear 1/4 venting windows? I only need the sash ( frames with the glass in them) along with the operating mech's and handles.Thanks Steve,PS having that same starting problem have to give it a hit of starting flu. new fuel pump, so "that ain't it" maybe electric ( 6 volt ) inline pump would help??Thanks again Link to comment Share on other sites More sharing options...
Guest Jen_ Posted July 14, 2012 Share Posted July 14, 2012 I am active duty Army so I am always traveling all over the place. Makes it tough to get to my projects. Hopefully I will have some time again soon. I did check the doors and they suffered a lot of rust on the bottom portions. They can be repaired, but will take some work.it all depends on price as said to you before , there is many parts i am interested in but i see others are as well , Jen Link to comment Share on other sites More sharing options...
Guest 1930 Posted July 15, 2012 Share Posted July 15, 2012 Sorry...I drove the car back from Louisiana and was only home two days and now I'm in Alaska until the 22nd. Not ignoring any of you, I just travel quite extensively and haven't had an opportunity to start pulling parts off. I don't want to promise anyone any parts until I'm sure that I have them and they are in a descent amount of shape to be used. Cheers,MarkI know exactly where you are as I lived in Valdez for some time and made trips to Fairbanks which is where I am thinking you are located, just outside there? Beautiful country and take advantage of you time there, just a suggestion would be to find Solomon lake just on the perimeter of Prince Rupert Sound in Valdez, you will have thought you went to heaven Link to comment Share on other sites More sharing options...
Guest dbenzing Posted July 18, 2012 Share Posted July 18, 2012 Mark,Thanks for your reply. I just need the choke cable knob. As far as the door lock, I just need the lock cylinder that fits in hole in the door under the door handle. From your pics it looks like its there. If the associated lock linkage is there, I'll buy that as well.Best,DaveDave,I have the choke cable (not sure on the condition yet) and the crank hole cover (metal is in good shape) and as for the lock cylinder, I will have to look when I get home. I don't recall if it was there. Mark Link to comment Share on other sites More sharing options...
knobless Posted July 27, 2012 Share Posted July 27, 2012 I have a seat pan for 33-34 just pan but may be to big to ship, may have to go freight,,,, Link to comment Share on other sites More sharing options...
Guest Jen_ Posted July 27, 2012 Share Posted July 27, 2012 I have a seat pan for 33-34 just pan but may be to big to ship, may have to go freight,,,,may check with greyhound , not sure on thier size limitJen Link to comment Share on other sites More sharing options...
1936 D2 Posted July 27, 2012 Share Posted July 27, 2012 may check with greyhound , not sure on thier size limit. JenCheck this out for a possible better rate: Busfreighter.com :: Save on Shipping :: About Us Link to comment Share on other sites More sharing options...
Guest 1930 Posted July 27, 2012 Share Posted July 27, 2012 may check with greyhound , not sure on thier size limitJenGreyhound is the way to go in my experience Link to comment Share on other sites More sharing options...
elevdoc5 Posted August 9, 2012 Share Posted August 9, 2012 (edited) Hi am looking for rear garnish mouldings w/ ash trays let me know . I am trying to restore my 33 I need the ash trays thanks Jim . please contact me at elevdoc5 @aol.com or call 781 733 3880 thanks again Jim Edited August 9, 2012 by elevdoc5 (see edit history) Link to comment Share on other sites More sharing options...
Guest 35dodgepickup Posted August 17, 2012 Share Posted August 17, 2012 Any parts still available? Thank you Link to comment Share on other sites More sharing options...
knobless Posted September 2, 2012 Share Posted September 2, 2012 are the rear vent windows still available, ? with operating mechenizms,(sas).... Link to comment Share on other sites More sharing options...
35cz8 Posted September 2, 2012 Share Posted September 2, 2012 Headlights for these older cars, before seald beams, can be a challenge to complete. I am still trying to get the original's for my 1936 Dodge but everytime some come up on E-Bay, they wind up out of my price range. Best of luck on your car and keep us all posted of your progress please.Bob Link to comment Share on other sites More sharing options...
Guest dbenzing Posted September 6, 2012 Share Posted September 6, 2012 Dave,I have the choke cable (not sure on the condition yet) and the crank hole cover (metal is in good shape) and as for the lock cylinder, I will have to look when I get home. I don't recall if it was there. MarkHi Mark. Have you had a chance to check on the lock cylinder yet? Do you know what you want ($) for the choke cable, crank hole cover & lock? I'm hoping to put my '34 Dodge DR Sedan up for sale by the end of the month and would love to be able to be able to add these parts before then. I'm boiling out the gas tank this weekend, then have just a few minor fixes to make.Thanks,Dave408-265-4842dbenzing@ix.netcom.com Link to comment Share on other sites More sharing options...
Guest 1934plymouth Posted September 7, 2012 Share Posted September 7, 2012 Hey Mark ... I need a radiator mount bracket, it located under the radiator down to the frame. I live in Denmark so you must be willing to send overseas. Sincerely Mikkel Link to comment Share on other sites More sharing options...
Guest dbenzing Posted October 10, 2012 Share Posted October 10, 2012 Dave,I have the choke cable (not sure on the condition yet) and the crank hole cover (metal is in good shape) and as for the lock cylinder, I will have to look when I get home. I don't recall if it was there. MarkMark, Any update on when parts will be available?Thanks,Dave Link to comment Share on other sites More sharing options...
Ian_Greenlaw Posted October 11, 2012 Share Posted October 11, 2012 Hi Guy ( GDenton ),I was rereading your request for the panel that covers over the windshild wiper motors and I pulled mine out today to look to see where everything is going and I took some photos for you. The panel covers the wiper motors and then there is a garnish metal panel that covers the trim which has the woodgrain look put onto it. Hope this helps.RegardsIan Link to comment Share on other sites More sharing options...
JACK M Posted October 12, 2012 Share Posted October 12, 2012 I am needing four of these catches. Dont know if 34 is the same, but 28 and 31 are. Screw holes are 0.6 inches C-C.Thanks, Jackcapyjack@comcast.net Link to comment Share on other sites More sharing options...
Ian_Greenlaw Posted October 12, 2012 Share Posted October 12, 2012 Hi Jack,Not sure if this helps but my 34 striker plate holes are offset and not side by side like your application.CheersIan Link to comment Share on other sites More sharing options...
JACK M Posted October 13, 2012 Share Posted October 13, 2012 Thanks Ian, That what I am seeing, some offset some horizontal. 31 Chrysler is offset, 31 and 28 Dodge are horizontal.Sure would like to scare up a set. Link to comment Share on other sites More sharing options...
Ian_Greenlaw Posted October 13, 2012 Share Posted October 13, 2012 Hi Jack,i have three brand new striker plates but they are vertical hole ( one on the top and one on the bottom ). No good for my car but haven't found what they belong to yet. If you come across some offset ones in your travels give me a yell could you.cheersian Link to comment Share on other sites More sharing options...
JACK M Posted October 13, 2012 Share Posted October 13, 2012 (edited) Jo Bo has some. He posts on here.28 Chrysler I think. Edited October 13, 2012 by JACK M (see edit history) Link to comment Share on other sites More sharing options...
Guest Onebadcoupe Posted October 14, 2012 Share Posted October 14, 2012 I have a 34 dodge coupe, I'm looking for the window garnish for the doors, Opera windows, and rear window, I'm also looking for a good pair of door handles, and the chrome ring around the grill. Any chance you still have these pieces and are willing to part with them? Thanks Link to comment Share on other sites More sharing options...
Ian_Greenlaw Posted October 15, 2012 Share Posted October 15, 2012 Garnish trims are a little hard to find. Door handles pop up on ebay now and then and the Chrome ring around the grill are very hard to find in good order. A guy I'm conversing with at the moment in Western Australia does have one on his wrecked 34 so I'll contact him to see if he wants to sell it. I had a spare, got it rechromed and sold it to someone in America for approx $170.I'll let you know if I find out anything.RegardsIan Link to comment Share on other sites More sharing options...
Guest ecirillo03 Posted October 15, 2012 Share Posted October 15, 2012 (edited) 1934 Dodge Sedan 4-DRLooking for headlights and stands, taillights and stands, outside rear door handles, rear window interior trim. Call Dennis 860-227-4447. Edited October 15, 2012 by ecirillo03 (see edit history) Link to comment Share on other sites More sharing options...
Guest 31DH Posted October 18, 2012 Share Posted October 18, 2012 Jack I have the door strickers & screws for you off a 31DB.I checked the 28DA and they are a little bit different. I PM'd you. Link to comment Share on other sites More sharing options...
JACK M Posted October 18, 2012 Share Posted October 18, 2012 PM recieved. 'I replied last night, let me know if you did not get my reply.I cant thank you enough. Link to comment Share on other sites More sharing options...
bbbbbb9 Posted October 24, 2012 Share Posted October 24, 2012 If the motor mounts are the same as the 36 Dodge and you have them I'd like them Link to comment Share on other sites More sharing options...
Guest cadaber Posted November 3, 2012 Share Posted November 3, 2012 All...My apologies for falling off the net. I have been traveling quite extensively. I have one more week and I will have two weeks of leave to mess with the car. I will start answering your questions whether I have what you are looking for off the 34. Once again, I apologize and will be able to take some pics of the parts you are interested in and you can let me know then if you would require them. Cheers Mark Link to comment Share on other sites More sharing options...
Ian_Greenlaw Posted November 4, 2012 Share Posted November 4, 2012 HI Mark,Thanks for the update. Can't wait to see what you come up withCheersIan Link to comment Share on other sites More sharing options...
Tinkeys Posted November 5, 2012 Share Posted November 5, 2012 Hi Mark if you still have a spare crank hole cover and 2 front guards I would be very interested cheers Tony. Link to comment Share on other sites More sharing options...
Ken_Lincoln Posted November 6, 2012 Share Posted November 6, 2012 Hi Ian ... I was talking to Stewart Elder about your lights, and it seems that Bosch made a conversion kit to change this type of light to sealed beam back in the 50`s... inner bucket fits in old housing mounts and dress ring covers and joins to 34 headlight Link to comment Share on other sites More sharing options...
Ian_Greenlaw Posted November 6, 2012 Share Posted November 6, 2012 Hi Ken,That would explain why mine has dress rings. I'm fumbling around on my computer at the moment trying to make my Avatar bigger.No luck yet ! Link to comment Share on other sites More sharing options...
bbbbbb9 Posted November 6, 2012 Share Posted November 6, 2012 rear tailights? motor mounts and frame motor brackets? Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now