Jump to content

- - - - -

Horn issues 59 Thunderbird

  • Please log in to reply
1 reply to this topic

#1 juanatejeda


    Senior Member

  • Members
  • PipPipPip
  • 244 posts

Posted 20 April 2012 - 05:38 PM


I need some parts for my horn, Steering Wheel side.

I need the three insulated washers that hold the base plate (triangle shaped) that holds everything together. I also need the last part that those three screws bolt into, as one of the holes seems to be stripped. I am attaching some pictures of the parts.

Attached Thumbnails

  • contact-plate.jpg
  • steering-wheel-parts.jpg


#2 whiskeyjack


    Junior Member

  • Members
  • PipPip
  • 22 posts

Posted 21 June 2012 - 01:56 PM

Concerning the stripped hole,if you hold the bolt on something hard (vice, anvil, etc) and tap it lightly with a small hammer to flatten the thread a bit it might save you getting a new part.This tends to fatten the threads so they grab as long as it isn't removed and replaced frequently.Some thread lock before putting it back together should hold it.

0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users