Jump to content


Photo
- - - - -

27 chrysler wheel bearings


  • Please log in to reply
7 replies to this topic

#1 TOM RADWILL

TOM RADWILL

    Junior Member

  • Members
  • PipPip
  • 18 posts

Posted 27 November 2010 - 02:43 PM

Can anybody supply, front wheel bearings, inner and outer, for a 1927 Chrysler Model 70.
They are Shafer brand, concave roller bearings.
Looking for NOS or known replacements

#2 hwellens

hwellens

    Senior Member

  • Members
  • PipPipPip
  • 634 posts

Posted 27 November 2010 - 04:27 PM

This my help
The Timken numbers are:
Front wheel inner - Cone 14132, Cup 14282
Front wheel outer - Cone - 1380, Cup 1329

#3 mribbich@wi.rr.com

mribbich@wi.rr.com

    Senior Member

  • Members
  • PipPipPipPip
  • 1,437 posts

Posted 29 November 2010 - 01:40 PM

The Shafer numbers are inner B6131-B6283, Outer A755-744. If the 1329 is a replacement I have two of them. Hope this helps. mribbich@wi.rr.com

Marv.

#4 Bill Boudway

Bill Boudway

    Senior Member

  • Members
  • PipPipPip
  • 563 posts

Posted 07 December 2010 - 11:00 PM

Hi Folks,
Would these numbers also work for a 1926 Chrysler model G-70?
Thanks

Attached Thumbnails

  • IMG_4372.JPG

1919 Packard Twin Six Touring
1926 Chrysler G70 Phaeton

#5 Bill Boudway

Bill Boudway

    Senior Member

  • Members
  • PipPipPip
  • 563 posts

Posted 07 December 2010 - 11:10 PM

Hello, again,
I forgot to give you the name of my bearing supplier.
Andy Fuhrman. Andy.Fuhrman@kaman.com
He's an antique auto guy with lots of patience and skill at finding the correct bearings.
Good luck,
1919 Packard Twin Six Touring
1926 Chrysler G70 Phaeton

#6 keiser31

keiser31

    Senior Member

  • Members
  • PipPipPipPip
  • 20,656 posts
  • LocationPhoenix, OREGON

Posted 07 December 2010 - 11:29 PM

Don't know if this helps, but the Chilton number is 7010 for the front inner bearing and 6370 for the front outer bearing. They interchange with 1927 Model 60 Chrysler and 1928 Model 62 and Model 72. They will also interchange with 1928-29 Model 65 and Model 75.

1931 Dodge Brothers DH6 business coupe w/ wire wheels
1931 Dodge Brothers DH6 business coupe w/ wood wheels (my 1st car and still have it)
and visions of my past old cars....


#7 TOM RADWILL

TOM RADWILL

    Junior Member

  • Members
  • PipPip
  • 18 posts

Posted 19 December 2010 - 04:10 PM

Thank you for the input. I was able to acquire all replacement roller cones and cups, from Valley Auto Parts in Colorado.

#8 safetyray

safetyray

    Junior Member

  • Members
  • Pip
  • 4 posts

Posted 17 October 2012 - 09:26 PM

i saw your post thogh its old i wanted to ask a question of you what do you use for the fabric u joints on ea end of the drive shaft and how is the assembly done washers ect. ? i have purchased some but the keep ripping thanks Ray




0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users