65 riviera rocker moulding

[Guest offy110]

hello

what is the best way to remove aluminum rocker moulding.drill out?

thanks

[1965rivgs]

Hi Offy,

The `65 rocker moldings are attached via phillips head screws from the side and hex head screws from underneath. After removing the hex head screws the moldings can be slid off the circular retainers which are mounted into the rocker panel itself. Hope this helps,

Tom Mooney

[Guest offy110]

thanks tom

i did not realize to i look a little harder.some used rivets to hold them on,over life of car