30dodge35 Posted April 30, 2015 Share Posted April 30, 2015 (edited) I am in need of a set of dust pans for 1930 DA , right and left, part number 210478 and 210479' mine are missing, If someone has a set or dimensions, I would like to see pictures with them installed and also of the pans out of the carI am not a big fan of having them installed from a working position, but from a safety issue on the right side, to isolate Carburator from the exhaust. Thanks in advanceJesse Edited April 30, 2015 by 30dodge35 (see edit history) Link to comment Share on other sites More sharing options...
Bullfrog_eng Posted May 2, 2015 Share Posted May 2, 2015 Jesse, mine are from 1929 DA but should be the same. They are also extremely rough and bent up. I intend to use them and straighten them up when I get around to it, but that has not happened yet! There should also be a separate piece that bolts on around the exhaust hole so that the hole is more snugly fitting around the exhaust, but I can't find it at the moment. As you probably realise, most people threw them away years ago and this is the only set I have found so far. I would think it would be pretty difficult to make a set from my photos and measurements, but they may give you some idea. If they were in better condition it would be possible to provide a pattern, but not at the moment. Ideally if you could beg/borrow/steal a set locally it would be easier to work it out. Anyway, for what they are worth here are the photos. First three are LHS, last three are RHS.John Link to comment Share on other sites More sharing options...
30dodge35 Posted May 2, 2015 Author Share Posted May 2, 2015 Thanks john , another member is looking for a set, hopefully his search will be successful ,if not these pictures help I can produce a set from the drawings, just need a set set of pictures of them installed , thanks for the help jesse Link to comment Share on other sites More sharing options...
30dodge35 Posted May 23, 2015 Author Share Posted May 23, 2015 Still looking for a set of dust pans, Probably 28 and 29 will fit, Still nee pictures of installed pans , in case I have to build from dimension pictures. Link to comment Share on other sites More sharing options...
30dodge35 Posted June 1, 2015 Author Share Posted June 1, 2015 I have pictures now, I am still hopeful ,I will find a set, if not I will reproduce from drawings and pictures,Still need a set of dust pans from 28, 29, or 30 Link to comment Share on other sites More sharing options...
30dodge35 Posted June 1, 2015 Author Share Posted June 1, 2015 John , picture of the piece around exhaust Link to comment Share on other sites More sharing options...
nearchoclatetown Posted June 2, 2015 Share Posted June 2, 2015 In your second picture, you do realize those holes should go through the oil pan bolts? Or the oil pan bolts should go through those holes , if you're not Pa. dutch? Link to comment Share on other sites More sharing options...
30dodge35 Posted June 2, 2015 Author Share Posted June 2, 2015 Yes, I figure they had to go somewhere . Link to comment Share on other sites More sharing options...
Bullfrog_eng Posted June 2, 2015 Share Posted June 2, 2015 The panels round the exhaust, yes that is how I remember them but still can't find mine. Must have put them in a safe place, probably with the steering box that I still can't find either...........John Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now