87 allante

Where can I find the coolant tube that is on the serpentine belt side. Mine is rotted so I am making one out of copper tubing until I find one.

Thanks Joe

Any chance a regular Cadillac 4.9 or 4.5 one would fit? I was able to find a few parts for my 88's and 90.5 that way. theres a few of those old DeVilles kicking around Ontario.

When it comes to Allante here in the states, the font of all knowledge is Dick Hussey out of FL. He has the cars, the parts and the knowledge.

Go here -

Thanks for the input but I got one out of the US and then the rear one sprung a leak. The ends of the 3/8 tube was rotten at the hose so I cut it off and made one out of a 3/8 fuel line. The furrow for the hose I used a brass compression furrow and soldered it on the ends then paint.

Another option is to take your old ones to a hydraulic shop and have them bent out of stainless and silver solder them together.

will cost a little more but you will never have to replace them again.

Thanks that is a very good option but if I had known sooner it would have been done. Next time.