mcgoo Posted December 17, 2014 Share Posted December 17, 2014 As listed in previous add I have a almost full set of all steel brackets required to join individual pieces of timber for the frame work of a 1930 Chrysler 4 door sedan, Holdens Built body. Brackets include, front cowl to floor, dash brackets, middle door pillar, rear mudguard / door pillar, T joins for top of pillars, rear brackets for curved roof section, front top corner brackets with mounts for windscreen. Link to comment Share on other sites More sharing options...
viv w Posted December 23, 2014 Share Posted December 23, 2014 Hi McGoo, I just got a 26 touring body from Australia in pieces and some of the parts don't seem to fit, please can you advise where your brackets picture 5 (IMAG0065) fit onto the body, I have one of these, but don't know if it's for a tourer body. Also any chance of a few pictures of the floor frame wood of your body please, there may be similarities with the touring body. Many thanks Viv. Link to comment Share on other sites More sharing options...
mcgoo Posted December 23, 2014 Author Share Posted December 23, 2014 hey Viv, is the tourer a soft top, if so this bracket is probably not part of the body. On my car which is a 4 door sedan it sits up the top of the front fire wall where the roof attaches.top right of body in this pichere are some pics of the floor frame work, but they are too big to upload so if you want to send me a pm email I will send them that way. Unfortunately my frame is now in many pieces.Glenn Link to comment Share on other sites More sharing options...
mcgoo Posted February 1, 2015 Author Share Posted February 1, 2015 All sold thanks Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now