1925 - 1930 Chrysler bits

I have replaced my wooden frame with steel and have all the steel brackets for a 1930 Chrysler Series 66 4 door sedan body. This is an Australian Holdens built body. I have dash brackets (pictured below), middle door pillar brackets, rear wheel arch cast brackets and all 'T' joint brackets and brackets for securing front cowl to floor. Some brackets missing when purchased vehicle.

Also have 90% complete timber frame previously advertised as well.

Set rear leaf springs, 13 leaf springs

Pair of headlight bowls 10 3/4" diameter and cross bar.

Hopefully my be useful to someone and am happy to supply further photographs if required. Will discuss price with interested parties and am open to reasonable offers as want to get rid of parts to free up some room.

feel free to call me on +61 424674229

Happy to organise postage at buyers expense.

The head light buckets are for a 1928 Model 62, the Model 72 used the same bucket but a different mount.

Actually, the 72 headlamp is larger and has a reflector in the top of the back to show high beam, same shape but larger. Some (72 Sport Roadster) are brass shells and plated, most sedans are steel and painted. Nice bits, just not in need at the present. Rob

I have a nickel plated Model 72 light, the ring fits on my 62 touring car buckets but it takes a larger lens.

Actually, the 72 headlamp is larger and has a reflector in the top of the back to show high beam, same shape but larger. Some (72 Sport Roadster) are brass shells and plated, most sedans are steel and painted. Nice bits, just not in need at the present. Rob

These have the green reflector jewel in the top of the headlight.

The silver reflector on the Model 72's and some 62's will have about a 1/2 inch hole just above the head light socket to sine light through the glass jewel.

Hi, looking for rear bumper for 27 Chrysler 50 and also distributor housing on engine, 4 cylinder

.

Sorry no mechanical parts at all and no bumper