Hood hinge end or holders

When i got the grille/radiator setup got the 33 Plymouth, i didnt get any hardware for the hood hinge.

The body did have the rear hood hinge holder piece, i just wondered if the front is the same style.

See that my hood doesn't have actual pins coming out of the center pivot, it thought it may be the same.

also if there a good place to get this part that would be great.

i see a few sellers with Nos parts but they part doesnt look like it will work for this setup.

the link got the nos part

http://www.ebay.com/itm/NOS-1930s-DODGE-HOOD-HINGE-L-R-PIVOTS-DPCD-STAINLESS-STEEL-MIRROR-SHINE-TRUCK-/321599848970?pt=Vintage_Car_Truck_Parts_Accessories&hash=item4ae0d8420a&vxp=mtr

i have also see this part and wondered if anyone has used it, where the center strip slips into the holder, i imaging you have to use their center strip?

The link the the aftermarket part

http://www.ebay.com/itm/PLYMOUTH-DODGE-GM-1932-1933-1934-REPLACEMENT-STAINLESS-HOOD-HINGE-BRACKETS-/251734245493?pt=Vintage_Car_Truck_Parts_Accessories&hash=item3a9c87c075&vxp=mtr

Here is the one i think it maybe,

http://www.ebay.com/itm/1934-Plymouth-Dodge-Rear-Hood-Holdowns-/200407266143?pt=Vintage_Car_Truck_Parts_Accessories&hash=item2ea934335f&vxp=mtr

If anyone has just the front mount, id be interested as well.

thanks guys

Vendor for last Ebay link also sells the front hood hinge holder.

They give a discount if fornt and rear hold downs are purchased together.

Open link and scroll down the information for details.

http://www.ebay.com/itm/1934-Plymouth-Dodge-Front-Hood-Holdowns-/181329519433?pt=Vintage_Car_Truck_Parts_Accessories&hash=item2a3814e349

NC Industries of Sayre Penn. shows the hood hinge for 32,33,34 Plymouth,Dodge and DeSoto in prime or polished stainless Part #NP-035 stainless,#NP-036 prime. You have to state length. The "Base and Loop" for each end of the hinge is #NP-037 Chrome or #NP-038 primed for paint. They are on the net under www.windshieldframes.com (which they also make. I have one of theirs.) They have been around for 30 years and I've dealt with them with no problem. I believe their whole catalogue is on the net now at their site. They also send out a paper one for $2 I think.

When i got the grille/radiator setup got the 33 Plymouth, i didnt get any hardware for the hood hinge.

The body did have the rear hood hinge holder piece, i just wondered if the front is the same style.

See that my hood doesn't have actual pins coming out of the center pivot, it thought it may be the same.

also if there a good place to get this part that would be great.

i see a few sellers with Nos parts but they part doesnt look like it will work for this setup.

the link got the nos part

http://www.ebay.com/itm/NOS-1930s-DODGE-HOOD-HINGE-L-R-PIVOTS-DPCD-STAINLESS-STEEL-MIRROR-SHINE-TRUCK-/321599848970?pt=Vintage_Car_Truck_Parts_Accessories&hash=item4ae0d8420a&vxp=mtr

i have also see this part and wondered if anyone has used it, where the center strip slips into the holder, i imaging you have to use their center strip?

The link the the aftermarket part

http://www.ebay.com/itm/PLYMOUTH-DODGE-GM-1932-1933-1934-REPLACEMENT-STAINLESS-HOOD-HINGE-BRACKETS-/251734245493?pt=Vintage_Car_Truck_Parts_Accessories&hash=item3a9c87c075&vxp=mtr

Here is the one i think it maybe,

http://www.ebay.com/itm/1934-Plymouth-Dodge-Rear-Hood-Holdowns-/200407266143?pt=Vintage_Car_Truck_Parts_Accessories&hash=item2ea934335f&vxp=mtr

If anyone has just the front mount, id be interested as well.

thanks guys

Abe

I may have one get back to me.

Steve