Jump to content

PARTS FOR SALE: 1928-1931 Chrysler, Dodge, and Plymouth


Guest rich schmidt

Recommended Posts

Guest rich schmidt

PARTS FOR SALE (PICTURES ADDED!)

If you have any questions please contact me by e-mail: rschmidt1@stny.rr.com

Shipping will be paid by the buyer. USPS will be used for smaller parts and UPS for large parts.

Two Hubcaps: Fits 1987 Jeep J-10 4x4 Pickup last year for jeep 8 lbs

$45.00

1928-1931 Chrysler, Dodge, and Plymouth

California Car Cover: Fits 1928-1931 Chrysler, Dodge, and Plymouth 20 lbs-------- SOLD________SOLD___________SOLD

$100.00

It is mint and has never been used outside. Fits 1928-1931 4-door and is approximately 15 feet long and gray in color. .

10-gallon Gas Tank: Fits 1928-1931 Chrysler, Dodge, and Plymouth

$50.00

There are some pin holes that can be fixed. It is 36” long and 13” wide, 8” tall, with the fill hole on the driver’s side and gauge hole on the passenger side, it weighs approximately 25 lbs

Bumper Bolts: Fits 1928-1931 Chrysler, Dodge, and Plymouth 3 lbs--------

$20.00

5 are original, the rest are chrome replacements

Split Rim Tool with Tire Bar: Fits 1928-1931 Chrysler, Dodge, and Plymouth------$95.00

Weighs approximately 8 pounds

Hand Tools: Fits 1928-1931 Chrysler, Dodge, and Plymouth-----------------SOLD---------------------SOLD------------------SOLD

$25.00

Original Hand Wrenches, Screwdrivers, and Pliers 5 lbs-------

Ignition Switch, Battery Disconnect Switch (6 Volt or 12 Volt), Battery Connector ----- free ship

$25.00

Jack: Not sure of age (early style rivets)----------------------SOLD-------------------------------------SOLD-----------------SOLD

$10.00

Dirty but works flawless.

Accurate Instrument Company Dwell Angle & Tack-O-Meter: Model BT-162

$80.00

It comes with adjusting tools used on 55 T-Birds, approximately 10 pounds.

Speedo MPH Dial:

$15.00

Like new movement , comes with other parts (screws…etc.) free ship

post-62755-143142853013_thumb.jpg

post-62755-143142852864_thumb.jpg

post-62755-143142852879_thumb.jpg

post-62755-143142852894_thumb.jpg

post-62755-143142852909_thumb.jpg

post-62755-143142852925_thumb.jpg

post-62755-143142852939_thumb.jpg

post-62755-143142852954_thumb.jpg

post-62755-14314285297_thumb.jpg

post-62755-143142852984_thumb.jpg

post-62755-143142852999_thumb.jpg

Edited by rich schmidt (see edit history)
Link to comment
Share on other sites

  • 1 month later...
Guest rich schmidt

I Live in sayre pa 18840, 2 miles off of interstate 86 which is 20 miles east of binghamton ny. I listed the measurements ,it was 36" long, so just measure between the frame. My phone is 570-888-0459,or just give me yours and a good time to call.I have it packed and when i get your address i will take it to our ups store and get a price for you thanks rich schmidt

Link to comment
Share on other sites

Guest rich schmidt

1-14-15 give me your home address also so when i go to u p s store i can get a price on both addresses for shipping costs call me 1-570-888-0459

Link to comment
Share on other sites

Hi Rich, went out and measured the rear for my '31 CD8 Roadster chassis. Measures about 41.5" clear, and based on where the filler neck etc comes through rear cross member, I figure these tanks would have been about 40" long, with outlets about 33" apart. Appears your outlets on the 36" long tank are about 29" apart (by my estimation). So likely yours is for a pre '31 Chrysler, or perhaps a different series. Thanks for your interest, guess I'll keep looking.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...