1930 Oakland rear bumper

Hi I am restoring a 1930 Oakland 4dr 101. I am looking for a rear bumper bars .I have the bumper bracket but need the bars , they measure 66 in center bolt hole to center bolt . They are 1 3/4 in wide need to be platable . Howard kings32.

I am building the center bar for a '29 Oakland sport Roadster now. It is spring steel. Do you have a spring shop in your area? Most spring shops can get the spring steal in the width, length, and thickness you need. Then shape the arch of the steel to your sample (assuming you have one) then roll the eyes on the ends. Then just send it off to be plated.

Thanks for the reply Yes I went to my spring Co they are a large one in Baltimore ,can't get a long 66in iron in the oven . to make the spring .

They should be able to order the spring steel in the length they need. That's what I had to do.

I have found the bumper bars 'Wayne Koffel found a company that are making them up for us now. Kings 32

I made mine. I made the dies to press the center and had the local spring shop roll the eyes and arch the sweep. All I have left to do is grind the eyes to the correct width.

I can post pictures if you are interested.

Thank you Wayne Koffel found a place that is making them up for us. The price was good I thought .