Tom_Tams Posted November 9, 2014 Share Posted November 9, 2014 I'm doing some major body work on my '62 Skylark convertible project. I've got the trunk floor out and I have to replace the rear quarter panel up to the rear wheel well. It looks like the quarter panel is pinch welded to the inner fender. Is there a way of separating them or do I have to cut around the weld and hopefully repair the damage later? I'm an electrician not a bodyman so this is all new to me and the learning curve is steep.Tom Link to comment Share on other sites More sharing options...
JohnD1956 Posted November 9, 2014 Share Posted November 9, 2014 Weld cutters are available at tool & auto parts houses. They are basically small sized hole drill bits.. how many words need to be opened? Link to comment Share on other sites More sharing options...
Tom_Tams Posted November 12, 2014 Author Share Posted November 12, 2014 Hi John,Thanks for the reply. I cleaned things up a bit and found four spot welds on the outside edge of the joint. It shouldn't be too hard to cut those out. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now