Guest jack1100 Posted November 8, 2014 Share Posted November 8, 2014 Hallo:confused::confused::confused:I restoring a 59 Edsel Ranger and my problem is that i will the Sterring Column and the Sterring Wheel bring to the Painterbut i can this two Parts not seperate can anyone help my and give my Tips for thisIt was the Gear with Power SterringThank you from GermanyJürgen Link to comment Share on other sites More sharing options...
rick60 Posted November 11, 2014 Share Posted November 11, 2014 The steering wheel must be removed with a specifically designed tool. A steering wheel puller is a common tool it the US. The steering column is attached to the steering gear box. The outer tube can be separated from the gear box. The tube can be slid off over the steering shaft. It can be difficult to remove and install because of the angle of the column. The steering gear can also be removed from the frame and the unit disassembled out of the car. If you don't already have one, I would recommend purchasing a service manual. The manual will provide instructions for steering wheel removal and all other repairs your car will require. They are available on eBay. Good luck with your project. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now