Jump to content

Seperate Sterring Gear for Sterring Column


Guest jack1100

Recommended Posts

Guest jack1100

Hallo:confused::confused::confused:

I restoring a 59 Edsel Ranger and my problem is that i will the Sterring Column and the Sterring Wheel bring to the Painter

but i can this two Parts not seperate

can anyone help my and give my Tips for this

It was the Gear with Power Sterring

Thank you from Germany

Jürgen

Link to comment
Share on other sites

The steering wheel must be removed with a specifically designed tool. A steering wheel puller is a common tool it the US. The steering column is attached to the steering gear box. The outer tube can be separated from the gear box. The tube can be slid off over the steering shaft. It can be difficult to remove and install because of the angle of the column. The steering gear can also be removed from the frame and the unit disassembled out of the car. If you don't already have one, I would recommend purchasing a service manual. The manual will provide instructions for steering wheel removal and all other repairs your car will require. They are available on eBay. Good luck with your project.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...