Pete Phillips Posted November 4, 2014 Share Posted November 4, 2014 Says "Bendix" on it. Looks like early 1960s Ford to me, but did Ford use Bendix power steering equipment?Thanks for any help on this.Pete PhillipsLeonard, Texas Link to comment Share on other sites More sharing options...
dan at larescorp Posted November 4, 2014 Share Posted November 4, 2014 Looks like a Ford setup to me. Likely 65 Mustang from what I can see. Link to comment Share on other sites More sharing options...
oldford Posted November 4, 2014 Share Posted November 4, 2014 Definitely Ford. Also may be mid size like the one I had on my 1966 Fairlane.....Frank Link to comment Share on other sites More sharing options...
intimeold Posted November 5, 2014 Share Posted November 5, 2014 The smaller Fords used this setup, from the mid 60's to the advent of rack and pinion steering; on all the small and mid-size cars. You may be able to find a production number on the steering control valve to get it closer, by date, Link to comment Share on other sites More sharing options...
dan at larescorp Posted November 5, 2014 Share Posted November 5, 2014 Definitely Ford. Also may be mid size like the one I had on my 1966 Fairlane.....FrankThe 66 Fairlane cylinder had the ports turned 1/4 turn. Otherwise they are almost identical. Link to comment Share on other sites More sharing options...
Pete Phillips Posted November 5, 2014 Author Share Posted November 5, 2014 Thanks to all for confirming that it is from a mid-1960s Ford. I have cleaned it with a wire brush but do not see any numbers.Pete PhillipsLeonard, Texas Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now