Peter P Posted November 2, 2014 Share Posted November 2, 2014 I have some parts that I believe are for a 1929 or 1939 Pontiac Coupe. Pictures of what I have are below. Let me know if you have use of these parts and what you feel they are worth. These parts are in Western Canada Link to comment Share on other sites More sharing options...
Guest kaycee Posted November 2, 2014 Share Posted November 2, 2014 Hi Peter, These parts look like 1930. Good luck! kaycee Link to comment Share on other sites More sharing options...
Guest kaycee Posted November 2, 2014 Share Posted November 2, 2014 Peter, They could be 1929 or 1930 after looking at the radiator shell. I have a 1928, so I can't tell you the value, but someone out there can use them! kaycee Link to comment Share on other sites More sharing options...
Peter P Posted November 2, 2014 Author Share Posted November 2, 2014 Thank you Kaycee. Link to comment Share on other sites More sharing options...
Guest Badgoat Posted November 5, 2014 Share Posted November 5, 2014 Do you have the inspection plate for over the battery? Thanks! Link to comment Share on other sites More sharing options...
kings32 Posted November 5, 2014 Share Posted November 5, 2014 Could yoo send me some measurements on the bumpers length ( bolt center to center ) width of each bar . Along with price kings32 thankyou Link to comment Share on other sites More sharing options...
kings32 Posted November 6, 2014 Share Posted November 6, 2014 If you still have these parts let me know . I am looking for a set of bumpers . Hope they are the right length or longer kings32 Link to comment Share on other sites More sharing options...
kings32 Posted November 13, 2014 Share Posted November 13, 2014 Are these parts still available I would like an response as would like to have these Kings 32 Link to comment Share on other sites More sharing options...
Peter P Posted November 17, 2014 Author Share Posted November 17, 2014 Sorry bad goat, no inspection plate. Basically just what you see there in the pics.PeterDo you have the inspection plate for over the battery? Thanks! Link to comment Share on other sites More sharing options...
Peter P Posted November 17, 2014 Author Share Posted November 17, 2014 Hi Kings32,The bumpers are both the same width bolt centre to bolt centre. I am reading 59.25 inches. I am accepting offers. Parts are in CanadaPeterCould yoo send me some measurements on the bumpers length ( bolt center to center ) width of each bar . Along with price kings32 thankyou Link to comment Share on other sites More sharing options...
VintageRacingCar Posted November 18, 2014 Share Posted November 18, 2014 PeterHow much for the Radiator Shell??I have some parts that I believe are for a 1929 or 1939 Pontiac Coupe. Pictures of what I have are below. Let me know if you have use of these parts and what you feel they are worth. These parts are in Western Canada[ATTACH=CONFIG]278797[/ATTACH][ATTACH=CONFIG]278798[/ATTACH][ATTACH=CONFIG]278799[/ATTACH][ATTACH=CONFIG]278800[/ATTACH][ATTACH=CONFIG]278801[/ATTACH][ATTACH=CONFIG]278802[/ATTACH][ATTACH=CONFIG]278803[/ATTACH] Link to comment Share on other sites More sharing options...
Peter P Posted November 19, 2014 Author Share Posted November 19, 2014 I am asking for offers as I do not know what it is worth. If you have a figure in mind pm me. RegardsPeter Link to comment Share on other sites More sharing options...
kings32 Posted November 19, 2014 Share Posted November 19, 2014 What is the width of each bar ? could I get apicture to show how much bow is in the ends ? What would it cost to ship about ? My bumper is 66 in bolt to bolt Howard Link to comment Share on other sites More sharing options...
Peter P Posted November 20, 2014 Author Share Posted November 20, 2014 The first two photos are of the ( I assume) front bumper. It is actually shorter than the rear and substantially thinner without the extra bars that the rear one has. Width of the two bumpers is the same at 59.25 inches wide. The front bumper is 4.25" tall roughly and the rear is 5.5 inches tall. Hope that helps along with the additional photos. I do not know what would be the best way to ship them. I am in western Canada so Montana is the nearest customs crossing. Perhaps Greyhound would work? Link to comment Share on other sites More sharing options...
kings32 Posted November 24, 2014 Share Posted November 24, 2014 Thanks for the info . My bumpers are 66 inches long These won't work thanks again I posted on the pontic Oakland site Kings32 Link to comment Share on other sites More sharing options...
1929 pontiac coupe man Posted March 1, 2018 Share Posted March 1, 2018 are the parts still available Link to comment Share on other sites More sharing options...
1929 pontiac coupe man Posted April 14, 2018 Share Posted April 14, 2018 do you still have any of these parts Link to comment Share on other sites More sharing options...
Guest Posted April 14, 2018 Share Posted April 14, 2018 These are actually Series 6-29 parts which would have been on a vehicle built between August 29 and June 30 and would be considered to be a "true" 29. Of course the cars made after December 29 would have been sold as a 1930. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now