Claes Rocklin Posted October 24, 2014 Share Posted October 24, 2014 (edited) I am looking for good hubs for a 1920 Timken rear axle: The hub has a total length of 115 mm. The hub flange has a diameter of 192 mm. The part of the hub that is pressed into the center of the wooden wheel has a diameter of 58,5 mm. The threads for the hubcap are around 73 mm in diameter (Maybe it is a 27/8- 16 TPI). The hole for the axle shaft at the outside of the hub has a diameter of 25 mm. The hole at the opposite side has a diameter of 39 mm.The Timken axles were rather common so I hope you can help! Edited October 26, 2014 by Claes Rocklin (see edit history) Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now