lancemb Posted October 4, 2014 Share Posted October 4, 2014 I have two Kleenex holders that I removed the faces from for rechrome. They both look the same, except for the brackets. Does anybody know which is for which years? Also, I don't have mounting instructions. Are there holes under the dash for these already or will I have to make them? Thanks! Link to comment Share on other sites More sharing options...
Caballero2 Posted October 4, 2014 Share Posted October 4, 2014 (edited) I have a Super with one. It is mounted (you drill) to the heater plenum with two holes. I will check and get back if there are corrections to this statement.I have been unable to confirm the mounting at this time. I have misplaced the plenum from the Super, however there are two screw holes in the plenum of the Roadmaster at the approximate location that one might expect. Those holes are only 1 1/2" apart. I try to find any other info.Dan'57-76C'57-56R Edited October 4, 2014 by Caballero2 (see edit history) Link to comment Share on other sites More sharing options...
sean1997 Posted October 4, 2014 Share Posted October 4, 2014 (edited) Not the best picture, but mounting instructions for 1957. Edited October 4, 2014 by sean1997 (see edit history) Link to comment Share on other sites More sharing options...
Caballero2 Posted October 5, 2014 Share Posted October 5, 2014 There you go, thanks Sean.Dan Link to comment Share on other sites More sharing options...
lancemb Posted October 5, 2014 Author Share Posted October 5, 2014 Thank you! I guess if I am drilling my own holes it doesn't matter that the brackets are a bit different since the rest is identical. Link to comment Share on other sites More sharing options...
buick5563 Posted October 6, 2014 Share Posted October 6, 2014 The first pic looks very similar to a 55. Link to comment Share on other sites More sharing options...
lancemb Posted January 27, 2015 Author Share Posted January 27, 2015 Can anybody reference these to confirm which years these mounts will work on? I am restoring these, and was hoping to put them on my 57 and 58, but if I can't get one or both to work then I may sell them. It is hard to tell from the assembly instructions above what that bracket looks like, but I don't think it is like mine. I think that this style of holder was used from 56-58, with different brackets. Link to comment Share on other sites More sharing options...
tompett Posted January 31, 2015 Share Posted January 31, 2015 Can anybody reference these to confirm which years these mounts will work on? I am restoring these, and was hoping to put them on my 57 and 58, but if I can't get one or both to work then I may sell them. It is hard to tell from the assembly instructions above what that bracket looks like, but I don't think it is like mine. I think that this style of holder was used from 56-58, with different brackets. this is the 57-58 Tissue dispenser bracket. Same for 1959, but need a mounting kit . Tom P Link to comment Share on other sites More sharing options...
tompett Posted February 1, 2015 Share Posted February 1, 2015 The two Tissue Dispensers; the upper With the curved bracket looks like 55, the lower shoould be 56.Tom P Link to comment Share on other sites More sharing options...
bhambulldog Posted February 1, 2015 Share Posted February 1, 2015 The two Tissue Dispensers; the upper With the curved bracket looks like 55, the lower shoould be 56.Tom PI agree, the curved looks like for a '55 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now