Jump to content

DRIVE SHAFT WANTED!!


odyssey

Recommended Posts

DRIVE SHAFT WANTED!!

Need correct drive shaft for 1931 with a Warner 4-speed transmission.

This is a Spicer shaft (has the 'normal' joints, vs the later Mechanics joint).

From the rear u-joint flange to the tip of the front spline on the shaft is 56-1/16"

We only need the shaft itself.

A complete shaft assembly - with rear joint and front slip joint measures 58-3/8" from flange to flange. That assembly would have the shaft we need.

Any help out there? We have a broken car, would like to get it back on the road!

Thanks -

Tom Rasmussen

763-786-1518

odyrestorations@aol.com

Link to comment
Share on other sites

DRIVE SHAFT WANTED!!

Need correct drive shaft for 1931 with a Warner 4-speed transmission.

This is a Spicer shaft (has the 'normal' joints, vs the later Mechanics joint).

From the rear u-joint flange to the tip of the front spline on the shaft is 56-1/16"

We only need the shaft itself.

A complete shaft assembly - with rear joint and front slip joint measures 58-3/8" from flange to flange. That assembly would have the shaft we need.

Any help out there? We have a broken car, would like to get it back on the road!

Thanks -

Tom Rasmussen

763-786-1518

odyrestorations@aol.com

Tom, I have 2 of them that measure like you state in the add. One is from the speedster and the other is from a 153 I have. Ill be glad to loan you one until you find to buy. These both have the fine spline that the rear joint flange bolts into the tube. One is like new ready to install and one is crusty.... Let me know . Mike

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...