wanted 1934 Plymouth Windshield hinges

Is somebody making reproduction hinges for the windshield. I might be able to reproduce them if I had one to look at and get dimensions but would prefer to just buy some new or used. I'm getting to old to keep reinventing stuff.

Thanks

Lynn Wicker

If I am reading the parts book right, and if they are the same for more than one body style, I think you are looking for part 450199. And it looks like that same part was used on the Plymouth closed cars for 1933. It would not surprise me if the same year Dodge cars used the same part. That might give you a little bigger search for compatible parts.

You might want to check with N/C Industries in Sayre, PA as they make a lot of windshield parts for 1933 and 34 Plymouths:

N/C Industries

301 S. Thomas Ave.

Sayre, PA 18840

Telephone: +1.570.888.6216

Fax: +1.570.888.1821

email: sales@windshieldframes.com

http://www.windshieldframes.com

I don't see the hinges on their Plymouth and Dodge specific pages starting at http://www.windshieldframes.com/Products/Plymouth-Dodge.asp but I could have missed it and/or they don't have them listed but might know where one could get some.

Have a 34 Ply parts car that I can check.

Thank You!

Thanks for the information ply33, I will be checking that out.

Thank you for your reply.

Yes, let me know if you do have them and we can get together on the details.

Thanks again

No go on parts.

Sorry

I have a pair loose for my PD, I can get photos and dims Mod pm. unless someone comes by with the goods beforehand.

Thank you,

I have a couple of leads to follow up on this week but I will get back to you if they don't work out.

Lynn Wicker

Thank you for checking.

Needed to size them up for my next project so no problem, at least they will be a record for someone.

Have noted that there is up to 1/16" end float between the rotation faces i.e. 1 7/16" runs in a 1 1/2" slot.

Thank you very much. This looks like it could be done if it comes to that.

Lynn Wicker

Needed to size them up for my next project so no problem, at least they will be a record for someone.

[ATTACH=CONFIG]272187[/ATTACH] [ATTACH=CONFIG]272188[/ATTACH] [ATTACH=CONFIG]272189[/ATTACH]

Nice job on that tom. I'll do that also to other years. O heck, I'll just send them to you.

​Dave you are more than welcome to send any 33/34 parts in exchange for a drawing.

There are a pair on Ebay right now.

Looks like they could clean up and be usable.

http://www.ebay.com/itm/1932-33-34-35-Plymouth-Dodge-chrysler-windshield-hinges-/331404716873?pt=Vintage_Car_Truck_Parts_Accessories&hash=item4d2942ab49&vxp=mtr

There are a pair on Ebay right now.

Looks like they could clean up and be usable.

http://www.ebay.com/itm/1932-33-34-35-Plymouth-Dodge-chrysler-windshield-hinges-/331404716873?pt=Vintage_Car_Truck_Parts_Accessories&hash=item4d2942ab49&vxp=mtr

Thanks for the tip. There was a scramble the last minute or so of bidding and the other guy was faster than me. Better luck next time right?

there is a set on E bay http://www.ebay.com/itm/1932-33-34-35-Plymouth-Dodge-chrysler-windshield-hinges-/331417277126?pt=Vintage_Car_Truck_Parts_Accessories&hash=item4d2a0252c6&vxp=mtr

And another set:- Click for= http://ebay.com/itm/1933-1934-Plymouth-Dodge-upper-WINDSHIELD-HINGE-/191479472304?pt=Vintage_Car_Truck_Parts_Accessories&hash=item2c9510e0b0&vxp=mtr"]Hinges

On 9/27/2014 at 11:16 AM, Lynn Wicker said:

Thank you for your reply.

Yes, let me know if you do have them and we can get together on the details.

Thanks again

I have one, 

Just sold , ? sorry