Guest gricegear Posted September 2, 2014 Share Posted September 2, 2014 I have a 32 plymouth pb coupe. I found a set of 31 plymouth rear fenders for sale in good shape. My question is, will they fit my car? I know the pb has a lot of non interchangeable parts. Any help on this matter would be appreciated. thanks, nate Link to comment Share on other sites More sharing options...
Guest gricegear Posted September 2, 2014 Share Posted September 2, 2014 The picture is the fender in question. Link to comment Share on other sites More sharing options...
keiser31 Posted September 2, 2014 Share Posted September 2, 2014 Are the fenders from a coupe, also? Link to comment Share on other sites More sharing options...
Guest gricegear Posted September 2, 2014 Share Posted September 2, 2014 From what I am told. I have no way of knowing for sure Link to comment Share on other sites More sharing options...
ply33 Posted September 2, 2014 Share Posted September 2, 2014 I am surprised to see in the '28-'33 Master Parts List that PA and PB shared the same rear fenders for the coupe, roadster and touring (different fenders for each body style, but same between PA and PB). Looks like the sedans including convertible sedan were different between PA and PB.Based on that, if you can find a PA coupe rear fender it should be the same as a PB coupe rear fender. Link to comment Share on other sites More sharing options...
Bob Scafani Posted September 7, 2014 Share Posted September 7, 2014 the photo shows a sedan fender Link to comment Share on other sites More sharing options...
keiser31 Posted September 8, 2014 Share Posted September 8, 2014 the photo shows a sedan fenderThat is what I thought. We also know that a sedan fender will not fit a coupe. Link to comment Share on other sites More sharing options...
Guest gricegear Posted September 12, 2014 Share Posted September 12, 2014 Link to comment Share on other sites More sharing options...
thehandleman Posted September 12, 2014 Share Posted September 12, 2014 My 1929-1939 Plymouth Master Parts book says the coupe PA and the coupe PB are the same Part number 349575 Right and 349576 Left Link to comment Share on other sites More sharing options...
Guest gricegear Posted September 12, 2014 Share Posted September 12, 2014 Is there a part # stamped on them anywhere? Link to comment Share on other sites More sharing options...
thehandleman Posted September 12, 2014 Share Posted September 12, 2014 Is there a part # stamped on them anywhere?No or at least my NOS 1929 Plymouth fender has a stenciled ink part number on bottom, sorry alls I can say the PA and PB coupe rear are same. Suggest going to Plymouth club and ask earl buton to for measurements? Sorry Link to comment Share on other sites More sharing options...
Bill Harmatuk Posted September 12, 2014 Share Posted September 12, 2014 (edited) Will it, the fender, fit a Chrysler CJ-6, sedan ??If so I will buy it. If reasonable. Especially the one with paint, or both, as a package.I need pictures of the bolt hole side and the running board mounting area.Thanks Bill H Edited September 12, 2014 by Bill Harmatuk (see edit history) Link to comment Share on other sites More sharing options...
keiser31 Posted September 15, 2014 Share Posted September 15, 2014 [ATTACH=CONFIG]269195[/ATTACH]Looks like it has step pad mounting holes for a rumble seat coupe. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now