Mssr. Bwatoe Posted July 29, 2014 Share Posted July 29, 2014 (edited) LINCOLN-ZEPHYR / FORD BANJO AXLE BEARINGS WITH'COLUMBIA 2 SPEED TIMKEN NUMBERSTHESE ARE CURRENT NUMBERS THE GREEN BIBLE ONLY SERVICES THE BANJO UNIT AS AN ASSEMBLY SO TO THE BEST OF MY KNOWLEDGE HAS NO OEM FORD LISTINGS..PINION BEARINGS 31520 31593 3877 3820NATIONAL PINION SEAL 450082RING GEAR 25522 25578 363 368 Edited July 30, 2014 by Mssr. Bwatoe (see edit history) Link to comment Share on other sites More sharing options...
Beltfed Posted July 30, 2014 Share Posted July 30, 2014 Mssr. Bwatoe, I noticed the safety wire routing on the bolt heads shown in the pic. I have no idea as to who did it but it is not correct for proper safety wiring. There are neutral safety wiring on almost every bolt. As an example, the bolt head shown at the 12:00 o'clock position the wire coming from the left should be run through the hole at the 5:00 o'clock position exiting at the 11:00 o'clock position. Then proceeding to the bolt at the 1:00 o'clock position the wire should enter at the 6:00 o'clock position and exit at the 12:00 o'clock position and so on....I was a aircraft wrench for many years and if had safety wired it as your pic shows they would have torn my stripes off. Link to comment Share on other sites More sharing options...
Guest Jim Zephyr Posted July 31, 2014 Share Posted July 31, 2014 (edited) I should have inspected mssr Bwatoe's wire routing.... Edited July 31, 2014 by Jim Zephyr (see edit history) Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now