Guest tony1958 Posted July 28, 2014 Share Posted July 28, 2014 options i can use to lower my windsor Link to comment Share on other sites More sharing options...
keiser31 Posted July 28, 2014 Share Posted July 28, 2014 Go here for answers....http://www.jalopyjournal.com/forum/forums/the-hokey-ass-message-board.5/They may have some answers for you. They are into that sort of thing. We are here mostly to restore. Link to comment Share on other sites More sharing options...
Dave Mellor NJ Posted July 28, 2014 Share Posted July 28, 2014 Put it in your basement Link to comment Share on other sites More sharing options...
Restorer32 Posted July 28, 2014 Share Posted July 28, 2014 Let the air out of the tires. Link to comment Share on other sites More sharing options...
Rusty_OToole Posted July 28, 2014 Share Posted July 28, 2014 For the rear lowering blocks are the easiest, cheapest, and most popular. For the front you can get lowered spindle supports, or cut a coil off the springs, or take the spring mounting plate off the lower control arm and bolt it to the bottom of the arm. This drops the car an inch but does not affect the ride.Lower profile tires will lower your car too.You can lower the car 2 inches fairly easily, any lower requires frame or suspension work to prevent bottoming and scraping in normal driving. Link to comment Share on other sites More sharing options...
Dave Mellor NJ Posted July 29, 2014 Share Posted July 29, 2014 Display it in the Corvette museum. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now