WhipperSnapper Posted June 29, 2014 Share Posted June 29, 2014 (edited) I thought that it would best to start a new thread documenting Grace's restoration from start to finish. It has finally begun!!! Yesterday, a few friends and I spent about seven hours taking the car apart and tagging parts. Three of these guys are aviation mechanics for Delta, so they made pretty quick work of the disassembly. Grace is now down to the frame! I spent a few hours today cleaning off decades worth of grime from the frame and around the engine. The degreasing turned out well enough for the effort that was exerted.I've found a chrome shop and plan to drop off those bits for replating later this week. The body will be prepped for paint as and when I can find the time. We did find some rust on the front floor pans, which will need to be cut out and re-welded. I am hoping to get that done sometime before the end of July. The frame appears to be in excellent shape, so it just needs to be sandblasted, painted, and rebuilt. I'm hoping to have most of the frame work done by the end of July, but that may be a bit ambitious. Before Pics (link from my previous post): http://s778.photobucket.com/user/jos...0Buick%20SuperThe work that we did yesterday and today's degreasing:http://s778.photobucket.com/user/josephlong757/slideshow/Saving%20GraceThere is a massive amount of work on the horizon, but I feel like we're off to a good start. Edited June 29, 2014 by WhipperSnapper Typos (see edit history) Link to comment Share on other sites More sharing options...
JohnD1956 Posted June 30, 2014 Share Posted June 30, 2014 You're on your way. Keep up the posts. Good Luck. Link to comment Share on other sites More sharing options...
Eric W Posted June 30, 2014 Share Posted June 30, 2014 Look forward to seeing how it goes. Don't be afraid of giving us too many photos. The manuals are nice, but to see what things really look like is something else... Good luck! Link to comment Share on other sites More sharing options...
MrEarl Posted July 1, 2014 Share Posted July 1, 2014 GREAT Photobucket pictures!! and Man oh man, y'all got a lot done in 1 day. That was a lot of guys, good to have that many friends, and mechanics at that. Only one thing I noticed was missing, uhhh, where was the beer? But I would feel remiss if I didn't mention this and please don't be offended. I was sincerely glad to see you got the car back down off the concrete blocks and on the dolly before one of the blocks collapsed. The structural integrity of a concrete block is in it's vertical walls. It is reduced to almost nothing when laid flat or when you concentrate a load in a small area of the concrete bridging the horizontal webs such as I see in a couple of your pictures. I use concrete blocks to store my parts cars on and have people ask all the time "Oh My God, you don't work under those cars up on blocks do you?" My reply is "well yea, I figure concrete blocks hold up my house, won't they hold up a car?" What they don't know though is that I typically use 12 inch blocks and I have leveled the ground underneath each block with a 2 ft level and use a 2x8 board on top of the block that the car frame will be resting on. My preference is actually 2 ft long 6x6's instead of concrete. I once used a 6 inch concrete block turned sideways under a trailer tongue jack and it failed while jacking up the trailer. Saying all this just in case there might be one person out there that isn't aware. I don't mean to hijack your thread and again please don't think I am criticizing your technique of getting the car up and back down onto the dolly. I thought it was quite some engineering. Hey, I'm only an hour and a half away, let me know if you ever need help. (like the services of a concrete block structural engineer) Look forward to following your restoration!!! Link to comment Share on other sites More sharing options...
WhipperSnapper Posted July 1, 2014 Author Share Posted July 1, 2014 (edited) ...please don't think I am criticizing your technique of getting the car up and back down onto the dolly. There was very little technique in this madness! The photos make the process look a lot more organized than it actually was. We tried a few things that didn't work and improvised when needed. An example of this can be seen in the photos of the rear springs being compressed with straps and the frame rolling out on the rear drums. We did all that work lifting only to find that there was not enough clearance. In hindsight, I agree with you on the concrete blocks. We got lucky that they held as well as they did. The 2x4's also proved too weak to gain significant leverage between the frame and body, so we probably should have gone with thicker boards. Also, the casters on the wooden body frame are only rated at 450 lbs. each, so we had to redistribute the weight as the back two were beginning to warp. These do the job, but heavier duty wheels would have been nice. The method that we used was cheap, relatively quick, and it did ultimately work. No one got hurt and we had enough folks around to keep eyes on potential issues and stabalize the body as it was being lifted and lowered. I would not try this with less than five people and I would certainly not attempt this in a hurry. Removing the body from the frame took quite a while. The shop crane was a big help also. The beer was intentionally put away until the heavy lifting was done. We didn't want anyone losing focus and getting hurt. After it was all done, we grilled up a steak dinner and polished off a case (or two?) of beer. It was a nice way to end the day. I'm still shocked at how much we were able to get done in just 7 hours. After this, I will never attempt to take a car apart by myself again. This is definitely the way to do it! The same group is coming back to help reassemble once paint, chrome, etc. are done. Having help like this really speeds things along. I figure there's no reason we can't have this all done by Fall IF the money holds out. I think it's all going to come down to the cost of paint and whether or not I decide to take it on myself or farm it out. I'm still debating that. My wife did her masters at UGA, so I know the route to Athens quite well. It'd be great to get together at some point and we could even break out the beer, assuming there are no concrete blocks and 2x4's involved. Edited July 1, 2014 by WhipperSnapper typos (see edit history) Link to comment Share on other sites More sharing options...
WhipperSnapper Posted July 16, 2014 Author Share Posted July 16, 2014 So, I got a little curious last night and pulled the valve cover... Link to comment Share on other sites More sharing options...
Fr. Buick Posted July 18, 2014 Share Posted July 18, 2014 All that in one day?????????????????????? Link to comment Share on other sites More sharing options...
buick41 Posted July 18, 2014 Share Posted July 18, 2014 Nice Thread, finally when the body is separated from the frame you see what has to be done to do it right . have fun and keep your pictures posted . Paul Link to comment Share on other sites More sharing options...
WhipperSnapper Posted December 4, 2014 Author Share Posted December 4, 2014 (edited) So, progress has slowed on the Buick since the initial tear down. My wife and I embarked on an extensive home remodel this summer and that zapped most of my will to tinker in the garage. Now that it's done, work on Grace has resumed.After the initial tear down, the frame was pressure washed and moved to the shop. The body was placed on a wooden frame and rolled into the main garage. Large "soft" interior items (seats, door panels, etc.) were wrapped in plastic and put into storage. All body panels and chrome was labeled and put into storage. Everything else was bagged, tagged, and organized in plastic bins for later inspection and cleaning.The next step was to remove the engine and transmission from the frame. This was a relatively straight forward process but there were a few glitches. The pressure washing had removed most of the grime but degreasing was still a major chore. A few of the bolts, especially those attaching the manifold, were tough to remove. Some PB Blaster took care of most but a couple did break off and required a great deal of patience to remove.I decided to remove the engine and transmission separately and solicited the help of a friend to keep swinging on the crane to a minimum. The engine came out easy but did not fit well on the stand. The block is very long and the stand flexed too much for comfort under the engine's full weight. We decided to improvise with cement blocks and 2x4's to insure that the set-up was stable.The DynaFlow was removed and set aside. We'll tackle it after the engine is rebuilt.With the engine securely on it's stand, it was time to remove the top end. I was surprised at the amount of grime and dried sludge that I saw as I got into it. I didn't find any obvious damage, but a lot of degreasing will be required before any real inspection can take place.The improvised engine stand was not going to allow safe removal of the oil pan, so I decided to stand the engine up vertically and pull the timing cover, sprockets, chain, and oil pan. Getting the engine safely up-right was a chore. Here, you can see the grime behind the timing cover and on the chain / sprockets. Nasty!And now, for the oil pan removal. The sludge was 3/4 of an inch thick at the lowest point in the pan!Here is the bottom end of the motor with the pan removed.The engine was then carefully turned upside down and the crankshaft was removed. The crankshaft bearings have seen better days but the crankshaft itself looks to be fine. Edited December 4, 2014 by WhipperSnapper (see edit history) Link to comment Share on other sites More sharing options...
WhipperSnapper Posted December 4, 2014 Author Share Posted December 4, 2014 And with that, we're pretty much up to date. In addition to the above, the frame has also been stripped of the exhaust, brake booster, brake lines, fuel lines, and steering components. I hope to have the block completely disassembled this weekend. After that, I'll begin degreasing and inspecting the individual parts. Link to comment Share on other sites More sharing options...
WhipperSnapper Posted December 4, 2014 Author Share Posted December 4, 2014 I forgot to attach photos of the oil pick-up. More nasty sludge. Link to comment Share on other sites More sharing options...
Bill Stoneberg Posted December 4, 2014 Share Posted December 4, 2014 When I pulled one engine, a friend of mine had a stand made for tank engines it seemed. It hardly flexed. Next time on a different motor, I had to do it on the ground or a metal table. those suckers can trash a stand in a hurry. Link to comment Share on other sites More sharing options...
WhipperSnapper Posted December 4, 2014 Author Share Posted December 4, 2014 A tank engine stand is probably what I needed! Of all the things I was expecting, I did not even consider that the engine might not fit safely on the stand. Oops. Link to comment Share on other sites More sharing options...
Mark Simmons Posted December 4, 2014 Share Posted December 4, 2014 I've had the experience of Buick straight 8 engines mounted on different engine stands and also the bending and breaking of some of the stands. No deaths or serious injuries but very scary. Seems that I saw a cradle style stand advertised years ago now for the inline motors but I can't remember the name of it to even start looking for one. Has anyone else seen a cradle type stand for these type motors? Link to comment Share on other sites More sharing options...
WhipperSnapper Posted December 4, 2014 Author Share Posted December 4, 2014 So, I've been making a parts list using the Bob's Automobilia catalog. Are there any other parts sources that you guys would recommend? I'm mainly using Bob's for the convenience of the catalog and haven't really been doing my due diligence checking pricing and reading reviews from other sources. Are there any parts sources out there that I should be wary of? Link to comment Share on other sites More sharing options...
ILIKECARS53 Posted December 5, 2014 Share Posted December 5, 2014 check out oldbuickparts.com in new jersey Link to comment Share on other sites More sharing options...
rick60 Posted December 5, 2014 Share Posted December 5, 2014 I worked at a Buick dealership that opened in 1912. They had some of the old equipment stored in the parts department. The engine stand looked as if it could support an entire new car. It was massive. You turned a crank to rotate the engine on the stand. Link to comment Share on other sites More sharing options...
WhipperSnapper Posted August 30, 2015 Author Share Posted August 30, 2015 (edited) Hello fellow Buick enthusiasts! Ready for a long-overdue update!? So, the frame is completely stripped now and ready to be sand blasted! There is some damage from a past fender bender that will need to be addressed but, aside from that, she is in great shape. Sand blasting has been put on hold until my F-250 is back from the shop. Things were moving slowly there for a bit, so I decided to go ahead and send the radio off to be restored. The work was done by Bob's Radio & TV in Oceano, CA and they did a fabulous job! FM and AUX was added but you'd never know by the look of it. Before (coke can for scale): After: AUX Input: Bob's sends back the bad parts for your review. There were so many! No wonder the radio didn't work. I've also been working on the body and have made some interesting discoveries in the process. One of the previous owners refreshed the interior and in the process, apparently found some pesky rust. Rather than properly repair the floor pans, he cut up old street signs and riveted them down! I spent several hours pulling them up and scraping off the duct tape (YES! DUCT TAPE!) that he used to cover the edges. I was shocked to find such a mess hiding under that beautiful interior. The rust goes deep. All four floor pans will need to be replaced. I have also spent a lot of time cleaning, tagging, and bagging hardware. While it's not the most exciting part of a restoration, it's very gratifying to see the shiny old parts ready for another 64+ years of service! More to come soon! Edited August 30, 2015 by WhipperSnapper (see edit history) 3 Link to comment Share on other sites More sharing options...
WhipperSnapper Posted September 18, 2015 Author Share Posted September 18, 2015 (edited) I was hoping that someone could tell me the trick to removing the pistons from the block. They don't seem to clear and the shop manual is not helpful. Edited September 18, 2015 by WhipperSnapper (see edit history) Link to comment Share on other sites More sharing options...
Ben Bruce aka First Born Posted September 19, 2015 Share Posted September 19, 2015 Great progress. To remove the pistons will probably require a ridge reamer. A tool which fits into the top of the cyl and removes the ridge at the top. One can usually be rented for the job. The piston will then slide right out. Ben Link to comment Share on other sites More sharing options...
NC-car-guy Posted September 22, 2015 Share Posted September 22, 2015 Great progress. To remove the pistons will probably require a ridge reamer. A tool which fits into the top of the cyl and removes the ridge at the top. One can usually be rented for the job. The piston will then slide right out. BenBen is right. Any of the big-box auto stores will rent you one for about $20-$30 dollars. Link to comment Share on other sites More sharing options...
WhipperSnapper Posted September 26, 2015 Author Share Posted September 26, 2015 Thanks to you both. Link to comment Share on other sites More sharing options...
WhipperSnapper Posted September 27, 2015 Author Share Posted September 27, 2015 I'm hoping that someone can shed some light on the original color of rear differential housings. Most of the original restorations that I've seen show them painted black but mine appears to have been red at some point. Link to comment Share on other sites More sharing options...
GARY F Posted September 27, 2015 Share Posted September 27, 2015 in your very first post you said you found a chrome shop and took parts there. would you care to give out the name and where it is. thanks Link to comment Share on other sites More sharing options...
WhipperSnapper Posted September 28, 2015 Author Share Posted September 28, 2015 Try Dallas Chrome in Dallas, GA. I received several references prior to contacting them. You can also try Custom Plating in Snellville, GA. Both shops came highly recommended. Link to comment Share on other sites More sharing options...
WhipperSnapper Posted September 29, 2015 Author Share Posted September 29, 2015 Anyone able to comment on the rear differential housing color for a 51'? If not, I guess black she goes. Link to comment Share on other sites More sharing options...
MrEarl Posted October 24, 2015 Share Posted October 24, 2015 From your picture it appears to be the same as a '54 Link to comment Share on other sites More sharing options...
buick man Posted October 25, 2015 Share Posted October 25, 2015 Looking good !. From what I can tell from the well preserved california Buicks I have seen, and the all original 57 RM coupe I own, it has been confirmed that the only part of the axle/drive assembly that was painted from cars produced out of the west coast and texas factories, with Buick's trademark rust red is the real axle carrier assembly. The axle shafts, rear transverse stabilizer shaft, axle differential housing, the forward strut rods and the entire torque tube assembly were not painted at all and were presented in only natural unfinished metal albeit the occasional assembly line blue, red and yellow paint marking lines applied during assembly usually appearing on the torque tube just behind the transmission and again just in front of the red rust oxide painted carrier assembly. So it appears that if one would like to go completely original after detailing and cleaning these parts, then a satin clear coat applied to all of the above mentioned components would put you spot on correct. Hope this helps out. Link to comment Share on other sites More sharing options...
WhipperSnapper Posted November 18, 2015 Author Share Posted November 18, 2015 Thanks to you both for the rear axle info! I've heard several differing opinions on the topic... One of my buddies said that it depended greatly on which factory produced the car as to what colors were used. He said that they'd paint them whatever generic color they had (blue, red, black, etc.) available due to cost cutting and post war financial difficulties. I'm not sure how accurate this is, but it would explain the variation I've seen in color. Sorry for the delayed response gents. I used to receive a handy email every time someone replied to this thread, but no more. I must have messed up a setting somewhere. Link to comment Share on other sites More sharing options...
Guest Rob McDonald Posted November 19, 2015 Share Posted November 19, 2015 Good thread and good progress, too. You've come to the right place to get expert advice on authenticity, Link to comment Share on other sites More sharing options...
Bill Stoneberg Posted November 27, 2015 Share Posted November 27, 2015 I painted the rear end carrier housing primer red as that is how I found it on my 50 wagon. Link to comment Share on other sites More sharing options...
Buicknutty Posted November 28, 2015 Share Posted November 28, 2015 The entire rear axle on my '56 Roadmaster was painted black, semi gloss, similar to the frame. Keith Link to comment Share on other sites More sharing options...
WhipperSnapper Posted September 14, 2016 Author Share Posted September 14, 2016 (edited) The frame is cleaned and painted! I should have it rebuilt and rolling by the end of the month, if all goes as planned. Does anyone happen to know about rebuilding the shocks / dampeners? I'd really prefer to do it myself vs. sending them off, but I can't find any information on how to go about it. Edited September 14, 2016 by WhipperSnapper (see edit history) 5 Link to comment Share on other sites More sharing options...
Pilgrim65 Posted September 18, 2016 Share Posted September 18, 2016 Wippersnapper, not being hands on with mechanicals myself , following your project with interest and admiration , congratulate you on what you have achieved so far and wish you good progress , I shall be following , keep posting . Thanks pilgrim 1 Link to comment Share on other sites More sharing options...
WhipperSnapper Posted September 18, 2016 Author Share Posted September 18, 2016 Thanks Pilgrim! They'll be more to come very soon. Link to comment Share on other sites More sharing options...
WhipperSnapper Posted September 18, 2016 Author Share Posted September 18, 2016 So, I decided to tackle the rear differential this weekend. It's not quite finished yet because of the rain, but the primer is on and it's good enough to share! I had considered painting the housing brick red (as discussed above) but decided on matte black to keep things simple. I also cleaned and painted the rear springs. The rear end should be completed and bolted back to the frame by Wednesday if the weather cooperates. 3 Link to comment Share on other sites More sharing options...
WhipperSnapper Posted September 24, 2016 Author Share Posted September 24, 2016 Today was another exciting day of cleaning Buick parts. Have I mentioned yet how much I hate sandblasting? For those of you who haven't tried it, it's the worst. The wheels are finished but everything else needs one more coat of primer. That'll happen in the morning, followed by a pretty coat of black paint! 3 Link to comment Share on other sites More sharing options...
old-tank Posted September 24, 2016 Share Posted September 24, 2016 Nice job. The only time sandblasting can be endured in on a cold dry day. 1 Link to comment Share on other sites More sharing options...
WhipperSnapper Posted September 25, 2016 Author Share Posted September 25, 2016 (edited) Finished painting the parts from yesterday's cleaning. They turned out nice. Edited September 25, 2016 by WhipperSnapper (see edit history) 3 Link to comment Share on other sites More sharing options...
WhipperSnapper Posted September 25, 2016 Author Share Posted September 25, 2016 My stainless steel fuel and brake lines have seen better days, but I think that they're worth restoring. I've been playing around with different methods and think that I've settled on a strategy. I'll start on them tomorrow and we'll see how they turn out. Here's what they look like now. Have any of you attempted this before? Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now