Looking for a Model & serial number plate.

In need of a 1933 Studebaker Rockne Model 10 4Dr Sedan DeLuxe Model & Serial number plate, mine was missing when I received the car. The top Model number on the plate would need to be 31-W-2 and the bottom Serial number would be 46??. This is the plate that would be located on the bottom of the cowl on the drivers side, the steel plate is approximately 3-3/4" long and 1-11/16" wide.

Tim,

The plate you question is the body tag, not the Serial Plate.

Your body tag would look exactly like this, only W-2 instead of W-1 and, obviously, with a differing body number on the second line. If the National Museum has your production order you can pinpoint the precise body number.

This is 1-1/2"x3-3/4" and is being reproduced to your specification by Jerry Kurtz of Dover, PA. (717) 308-1800. Jerry is, no doubt, at this moment in Dover, DE for the SDC International. He is on this AACA forum, as well as the SDC forum as jerezstude.

http://forums.aaca.org/members/jerezstude/

http://forum.studebakerdriversclub.com/member.php?5387-jerezstude

The Serial No. plate would be on the left frame rail just behind the front tire and look like this.

See http://forums.aaca.org/f126/tittle-needed-374001.html

They do not have the Rockne plate as far as I know but use a Studebaker one.

Very few will note the difference

I have a Rockne Serial plate mounted on the left frame rail, I need a body tag with 31-W-2 on it and a body number below it.

Tim,

Did you contact Jerry? He's home from the SDC Meet.

Jerry Kurtz of Dover, PA. (717) 308-1800