Guest Rivlark Posted June 24, 2014 Share Posted June 24, 2014 Hi EveryoneI am new to the forum and hope my first question is not too unusual. I have a question regarding the 3OO cu. in. V-8 engine motor mounts for my '64 Skylark. I read somewhere or else someone told me that the '64 motor mounts are unique to the year and not interchangeable with the '65 and later mounts. I guess my question is: first, is this true and, second, what do you do when you need these mounts?Does anyone know what is different between the '64's and the later ones. Would there be any practical way to adapt the later mounts to fit the '64? I does appear that the motor mounts that are readily available are listed as 1965+.Thanks in advance for any help you can provide.John Link to comment Share on other sites More sharing options...
trp3141592 Posted June 24, 2014 Share Posted June 24, 2014 Hi,There are rebuilding services available--google for them.If you are inclined to DYI, this may be of help to you: http://www.fatfenderedtrucks.com/motor_mount_rebuild.html--Tom Link to comment Share on other sites More sharing options...
ol' yeller Posted June 25, 2014 Share Posted June 25, 2014 I seem to remember that either would bolt to the engine block but there is a difference in the pad that bolted to the crossmember. If you change out the metal pad to the '65 or later ones you could use the later engine mounts. Your other option is to have your old ones revulcanized. There are several vendors who provide this service. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now