impacsys Posted June 18, 2014 Share Posted June 18, 2014 The turn handle on my ignition switch broke off. I fabbed a replacement. When I took the switch apart I did not mark the position. Dumb butt! Anyway can someone tell me how to line it up?Attached is a picture showing a punch mark circled in red. Does anyone know where this mark is to point to? Link to comment Share on other sites More sharing options...
28 Chrysler Posted June 18, 2014 Share Posted June 18, 2014 If you have a Meter or a test light turn it to one of the on positions and check for continuity across the bat terminal and the curb or headlight.There shuold only be two possibilities. Link to comment Share on other sites More sharing options...
impacsys Posted June 18, 2014 Author Share Posted June 18, 2014 a meter would have been my next step if guess work hadn't done it. The punch mark goes down at 6 oclock. any idea where I can get an original handle replacement?Thx for the help! Link to comment Share on other sites More sharing options...
vintchry Posted June 19, 2014 Share Posted June 19, 2014 Check with Jay at asthheime@ptd.net I believe he has reproduced this handle.Robhattiesgarage@comcast.net Link to comment Share on other sites More sharing options...
HarryJ Posted June 20, 2014 Share Posted June 20, 2014 What series Chrysler is it? Got some pics? Link to comment Share on other sites More sharing options...
impacsys Posted June 24, 2014 Author Share Posted June 24, 2014 it is a series 70. I have many pics prior and during restoration that I hope to complete before Autorama here in Houston. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now