Guest jfavillo Posted June 16, 2014 Share Posted June 16, 2014 Hello everyone I need to try and find parts for a 1937 studebaker dictator but cant seem to find any I saw some posts on here for parts but need more help all main part are solid I need a lot of small parts Link to comment Share on other sites More sharing options...
Guest jfavillo Posted June 16, 2014 Share Posted June 16, 2014 Here are some pics Link to comment Share on other sites More sharing options...
nvonada Posted June 16, 2014 Share Posted June 16, 2014 Hello and welcome! That looks like a sharp Dictator you have. Love the grille and headlights! Parts for pre-war cars are spotty. Sometimes you can't find it for love or money, other times it is on the shelf at NAPA. Your first stop should probably be our fine collection of Studebaker vendors. Most are listed on the Studebaker Driver's Club web site under "Resources". http://www.studebakerdriversclub.com/index.aspYou also can get the parts and service manuals which are invaluable. There are also lots of parts hoarders and vendors on this web site and the SDC forums so post what you are looking for and you might get a hit. I also surf e-Bay a couple times a week. Things show up there all the time and sometimes for good prices. The problem is that many people have no idea what they have so you have to use a pretty broad search and be willing to do some detective work. If geography permits the big swap meets (Hershey!) also are good sources. But again you have to be prepared with what you need and how much you are willing to pay for it. Nathan Link to comment Share on other sites More sharing options...
nvonada Posted June 16, 2014 Share Posted June 16, 2014 I was just looking at your pictures again. Looks like someone did a really interesting mod to fit another car's temperature gauge into the old gauge face plate. I have never seen anything like that. Link to comment Share on other sites More sharing options...
jerezstude Posted June 16, 2014 Share Posted June 16, 2014 Where are you located and what are you looking for. I have many parts for 37s, however the best way to locate parts is through networking. There are several people who have parts for these cars but you generally don't kind much at car showsJerry Kurtz Link to comment Share on other sites More sharing options...
ellagee Posted June 18, 2014 Share Posted June 18, 2014 Not meaning to just jump into this thread but I need a front license plate bracket for a 1937 Dictator. Link to comment Share on other sites More sharing options...
rbk Posted June 18, 2014 Share Posted June 18, 2014 If you need parts for your car,post the part number of the parts you need.Invest in a parts book so you can look up the part numbers.Most vendors stock parts by part number.I stripped out a 1937 sedan and have many used parts.I stock over 22.000 different N.O.S. parts for Studebakers.Robert Kapteynstudebaker@mac.comPut Studebaker in the subject line otherwise it will end up in trash. Link to comment Share on other sites More sharing options...
serg37pres Posted July 7, 2014 Share Posted July 7, 2014 Hello everyone I need to try and find parts for a 1937 studebaker dictator but cant seem to find any I saw some posts on here for parts but need more help all main part are solid I need a lot of small partsHello jfavillo i saw your post and i got a buddy in Utah that has a parts car hope this helps you. Jason 801-623-9167.If he doesnt have what you need buzz me at 909 609-5920 CA Link to comment Share on other sites More sharing options...
barryh Posted July 7, 2014 Share Posted July 7, 2014 Hi, Sergio & Bob!www.studebakersite.com Link to comment Share on other sites More sharing options...
drdon Posted September 9, 2014 Share Posted September 9, 2014 (edited) Jfavillo and serg37presi am not able to access and list any spares I might have now. Sorry. I am pretty sure I have a Dictator temp gauge somewhere and also a President light switch. No on the CE dome light lens. Edited September 9, 2014 by drdon spelled light wrong (see edit history) Link to comment Share on other sites More sharing options...
rbk Posted April 4, 2020 Share Posted April 4, 2020 (edited) Can someone post a picture of the front 1937 license plate bracket. I have many brackets without part numbers. If I have a picture , maybe I have one in that box. PM me if you are looking for other brackets. Edited April 4, 2020 by rbk (see edit history) Link to comment Share on other sites More sharing options...
rbk Posted April 4, 2020 Share Posted April 4, 2020 On 6/15/2014 at 11:16 PM, jfavillo said: Hello everyone I need to try and find parts for a 1937 studebaker dictator but cant seem to find any I saw some posts on here for parts but need more help all main part are solid I need a lot of small parts Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now