Guest RPM-Motorsports-Inc Posted April 18, 2014 Share Posted April 18, 2014 (edited) Here is a list of the current buick models we are parting out.36 Special 4 Door Sedan37 Century 2 Door37 Special 4 Door 38 Special 4 Door x339 Special 4 Door40 Super Coupe50 Special Sedanette50 Super Sedanette 2 Door 52 Roadmaster Riviera 4 Door57 Special 4 Door Sedan58 Super 2 Door Hardtop x258 Super 4 Door Hardtop59 Electra 4 Door Hardtop61 LeSabre 4 Door Hardtop64 Wildcat 4 Door Hardtop65 LeSabre 2 Door Hardtop68 Electra Thanks for choosing RPM Classic Parts for your classic auto parts needs. Our family has been in the auto parts and custom car business since 1957. RPM was started because of our passion for classic American vehicles. Our mission is to provide the best service and parts at affordable prices and we specialize in pre 1972 used parts.We have a massive inventory. If we don’t currently have it we can get it, just give us a call. We also ship worldwide, from nuts and bolts, to complete bodies. If you need it we can ship it.Only a small fraction of our inventory is currently listed on ebay. So please contact us.We are located in Albert Lea, MN.<a href="https://www.facebook.com/rpmmotorsportinc">Facebook</a><a href=" http://rpmclassicparts.com">Website</a><a href="http://stores.ebay.com/RPM-Motorsports-Inc">Ebay Store</a>Please give us a call at 1-888-223-1864 if you are looking for any parts. Edited April 22, 2014 by RPM-Motorsports-Inc (see edit history) Link to comment Share on other sites More sharing options...
jvelde Posted April 18, 2014 Share Posted April 18, 2014 RPM, I have sent you a Private Message about parts.Thanks,J. Velde Link to comment Share on other sites More sharing options...
50jetback Posted April 18, 2014 Share Posted April 18, 2014 (edited) I can highly recommend this business.Recently purchased some parts for my 1936 Buick restoration and the care with which the parts were dismantled, packaged and sent to me in Australia was exceptional. Plenty of photos of the cars are included on the advertisements and if you see something you need they are ready to accommodate and pull the parts and send them.http://forums.aaca.org/f162/1950-buick-super-2-door-jetback-369961.htmlThanks Brendon and the rest of the RPM team - wish you well and I'm sure many forum members will give you a call. Edited April 18, 2014 by 50jetback (see edit history) Link to comment Share on other sites More sharing options...
Guest RPM-Motorsports-Inc Posted April 19, 2014 Share Posted April 19, 2014 Jvelde, i replied to your PM and will check on your parts monday.And thank you for the kind words 50jetback, we do our best to ensure our customers are happy.If you need any parts, feel free to comment/ send me a pm and i can get back to you about them. Thanks! Link to comment Share on other sites More sharing options...
1939_Buick Posted April 23, 2014 Share Posted April 23, 2014 This engine is not 1937-38-39. The studded engine mount pads, shape of oil breather & dip stick position mean it (1947?) 1948 or later1937 engines do not have the stepped intake manifoldsWhat is the serial number? 37 38 39 40 BUICK GM STRAIGHT EIGHT 8 248 ENGINE MOTORhttp://www.ebay.com/itm/37-38-39-40-BUICK-GM-STRAIGHT-EIGHT-8-248-ENGINE-MOTOR/141219050345?rt=nc&_trksid=p2047675.m1851&_trkparms=aid%3D222002%26algo%3DSIC.FIT%26ao%3D1%26asc%3D22425%26meid%3D6403854277508238241%26pid%3D100005%26prg%3D9723%26rk%3D1%26rkt%3D5%26sd%3D261460028025%26 Link to comment Share on other sites More sharing options...
Guest RPM-Motorsports-Inc Posted April 23, 2014 Share Posted April 23, 2014 Thank you for letting us know, we had purchased a car and this came along with it but we were not sure it was the correct one for the car. We are looking into the exact info on it.Casting reads 1328767-7 Link to comment Share on other sites More sharing options...
1939_Buick Posted April 23, 2014 Share Posted April 23, 2014 There should be a serial number stamped on a machined flat section near the distributor just below the head gasket Link to comment Share on other sites More sharing options...
Eric W Posted April 23, 2014 Share Posted April 23, 2014 RPM, private message sent.Thanks,Eric Link to comment Share on other sites More sharing options...
retirednow Posted April 29, 2014 Share Posted April 29, 2014 Good company to deal with. Sending pm as well Link to comment Share on other sites More sharing options...
jvelde Posted April 29, 2014 Share Posted April 29, 2014 RPM, I got my parts in the mail today and have installed, and everything works great! What a great deal, and everyone was super nice to work with on the phone.Thanks,John V. Link to comment Share on other sites More sharing options...
Guest RPM-Motorsports-Inc Posted April 29, 2014 Share Posted April 29, 2014 Very glad to hear we were able to help you out!If you come across more needs in the future, be sure to give us a call.Thanks-RPM Motorsports Inc Link to comment Share on other sites More sharing options...
buick man Posted May 6, 2014 Share Posted May 6, 2014 RPM - buick man needs the main accelerator linkage return spring for a 57 Buick with a 4-barrel Carter. We believe the 4-barrel Rochester used a different spring but will confirm this one way or the other. I will post a photo of my broken spring here for viewing tomorrow. We just like to stay period correct. Link to comment Share on other sites More sharing options...
buick man Posted May 7, 2014 Share Posted May 7, 2014 (edited) This upper photo shows the Carter. Look close against the firewall to see one spring is attached to the firewall and the other is broken and attached to the linkage stay and I believe goes over to the carb for attachment. These are old photos and do not have more current ones showing how they looked properly attached. On the bottom Is a drawing of what I need for a proper OEM correct spring. As you can see the Carter setup uses a 2 spring setup of smaller diameter springs and the photos of the Rochester uses one large diameter spring in the back that does not attach to the firewall but attaches to the linkage stay and then goes on over to the rear of the manifold.A 58 with a Carter should have the same setup. Any input would be appreciated. Edited May 7, 2014 by buick man (see edit history) Link to comment Share on other sites More sharing options...
Guest RPM-Motorsports-Inc Posted May 22, 2014 Share Posted May 22, 2014 Bump! Got in a Super 4 Door recently. Link to comment Share on other sites More sharing options...
retirednow Posted May 22, 2014 Share Posted May 22, 2014 Year? Link to comment Share on other sites More sharing options...
Guest RPM-Motorsports-Inc Posted May 22, 2014 Share Posted May 22, 2014 48 Link to comment Share on other sites More sharing options...
Guest RPM-Motorsports-Inc Posted November 19, 2014 Share Posted November 19, 2014 Bump! Have been getting in some Buicks lately! Give us a call! 1-888-223-1864 Link to comment Share on other sites More sharing options...
buggy Posted November 23, 2014 Share Posted November 23, 2014 Hi I am looking for crown wheel and pinion for 1937 buick roadmaster series 80 with a 4.222 to 1 ratio . The crown wheel and pinion have 38 to 9 teeth count .Frank Link to comment Share on other sites More sharing options...
Guest Kevin Borich Posted February 14, 2015 Share Posted February 14, 2015 Hi - iI need a Rear Bumper Bar for a 1950 Buick Sedanette Jet Back 46D - do you have one, or can get one?cheers kev Link to comment Share on other sites More sharing options...
Guest Kevin Borich Posted February 15, 2015 Share Posted February 15, 2015 (edited) Hi RPM Motorsports - Have you a Rear Bumper Bar for a 1950 Buick Sedanette Jet Back 46D - do you have one, or can get one?They are Chromed & It's the ones with the over-riders & numberplate pocket , just like on the 51/52 Sedans - cheers kev - Australia Edited February 15, 2015 by Kevin Borich (see edit history) Link to comment Share on other sites More sharing options...
50jetback Posted February 15, 2015 Share Posted February 15, 2015 Hi RPM Motorsports - Have you a Rear Bumper Bar for a 1950 Buick Sedanette Jet Back 46D - do you have one, or can get one?They are Chromed & It's the ones with the over-riders & numberplate pocket , just like on the 51/52 Sedans - cheers kev - AustraliaTry them at their websitehttp://stores.ebay.com/RPM-Motorsports-Inc/_i.html?rt=nc&_nkw=buick%201950&_sid=98117780&_trksid=p4634.c0.m14.l1513&_pgn=1 Link to comment Share on other sites More sharing options...
Lapham3 Posted March 20, 2015 Share Posted March 20, 2015 A couple of us stopped in to visit RPM and found a nice operation. Not the jumble of a typical boneyard as it's tidy and organized. For those with parts needs, they probably don't have much time to visit websites to answer posts, so I'd give them a call. At our visit, most Buicks in the yard were pre '60, but from previous disassemblings, they have tons of parts shelved indoors. Dan Mpls. Mn. Link to comment Share on other sites More sharing options...
Buicknutty Posted March 22, 2015 Share Posted March 22, 2015 Just sent a PM about parts for a '68 Buick Wildcat.Keith Link to comment Share on other sites More sharing options...
Budensor Posted June 25, 2015 Share Posted June 25, 2015 Do you have any 1936, 1937 Buick Pheaton ( Converables ) I'm looking for the Rear Door Flippers Link to comment Share on other sites More sharing options...
Guest detpar210 Posted June 26, 2015 Share Posted June 26, 2015 Do u guys have a complete bumper jack including tire iron for 50s Buick Thk u Link to comment Share on other sites More sharing options...
Guest detpar210 Posted June 27, 2015 Share Posted June 27, 2015 do u have a complete bumper jack with tire iron for a 1950 Buick possibly up to a 52 Buick am at detpar210@aol.com thank U Gary Link to comment Share on other sites More sharing options...
g-g-g0 Posted June 27, 2015 Share Posted June 27, 2015 I have bought a couple of items from them and have found that giving them a call works pretty well. Seem to be a bunch of pretty nice folks. Link to comment Share on other sites More sharing options...
Dynaflash8 Posted June 27, 2015 Share Posted June 27, 2015 Here is a list of the current buick models we are parting out.36 Special 4 Door Sedan37 Century 2 Door37 Special 4 Door38 Special 4 Door x339 Special 4 Door40 Super Coupe50 Special Sedanette50 Super Sedanette 2 Door52 Roadmaster Riviera 4 Door57 Special 4 Door Sedan58 Super 2 Door Hardtop x258 Super 4 Door Hardtop59 Electra 4 Door Hardtop61 LeSabre 4 Door Hardtop64 Wildcat 4 Door Hardtop65 LeSabre 2 Door Hardtop68 ElectraThanks for choosing RPM Classic Parts for your classic auto parts needs. Our family has been in the auto parts and custom car business since 1957. RPM was started because of our passion for classic American vehicles. Our mission is to provide the best service and parts at affordable prices and we specialize in pre 1972 used parts.We have a massive inventory. If we don’t currently have it we can get it, just give us a call. We also ship worldwide, from nuts and bolts, to complete bodies. If you need it we can ship it.Only a small fraction of our inventory is currently listed on ebay. So please contact us.We are located in Albert Lea, MN.<a href="https://www.facebook.com/rpmmotorsportinc">Facebook</a><a href=" http://rpmclassicparts.com">Website</a><a href="http://stores.ebay.com/RPM-Motorsports-Inc">EbayStore</a> DOES THE 1964 WILDCAT HAVE A COMPLETE AND OPERATIONAL TILT WHEEL COLUMN FOR A COLUMN SHIFT CAR? HOW ABOUT CRUISE CONTROL COMPLETE? LAST, HOW ABOUT A PERFECT GLOVE BOX DOOR? LEMME KNOW.Please give us a call at 1-888-223-1864 if you are looking for any parts. Link to comment Share on other sites More sharing options...
Dynaflash8 Posted June 27, 2015 Share Posted June 27, 2015 FOR RPM: DOES THE 1964 WILDCAT HAVE A COMPLETE AND WORKING TILT WHEEL FOR A COLUMN SHIFT CAR? DOES IT HAVE A COMPLETE CRUISE CONTROL SETUP? LAST, DOES IT HAVE AN UNDAMAGED GLOVE BOX DOOR? Link to comment Share on other sites More sharing options...
Guest detpar210 Posted June 29, 2015 Share Posted June 29, 2015 thank u will give them a call I just bought a license plate holder for front from CTC auto ranch in Denton Tx outrageous price but I pd for it because I wanted it suggest not to buy there unless u really need the part & part with ur cash Gary Link to comment Share on other sites More sharing options...
rlcokc Posted June 30, 2015 Share Posted June 30, 2015 interested in the two supports which go from behind back seat close to middle, connected to metal rail above floorboard going at about a 45 degree angle to the wood support just behind the fixed window behind vent window. Brackets on each end to attach to the wood. If you could send photos and price would appreciate it. ThanksRod Link to comment Share on other sites More sharing options...
RR20 Posted February 16, 2022 Share Posted February 16, 2022 I need a 1936 Buick century rear passenger door, both headlamps and the back glass Link to comment Share on other sites More sharing options...
retirednow Posted February 17, 2022 Share Posted February 17, 2022 (edited) Yes! Another 6 1/2 year old thread brought back to life Edited February 17, 2022 by retirednow (see edit history) 2 Link to comment Share on other sites More sharing options...
g-g-g0 Posted February 17, 2022 Share Posted February 17, 2022 3 hours ago, RR20 said: I need a 1936 Buick century rear passenger door, both headlamps and the back glass Suggest you call the part number that is listed in the original post! Doesn’t appear that the original poster has returned since his original post. 2 Link to comment Share on other sites More sharing options...
Hans1965 Posted February 17, 2022 Share Posted February 17, 2022 This poster is still selling parts on eBay. I have acquired a few over the years, reliable and cheap. Link to comment Share on other sites More sharing options...
retirednow Posted February 17, 2022 Share Posted February 17, 2022 5 hours ago, Hans1965 said: This poster is still selling parts on eBay. I have acquired a few over the years, reliable and cheap. Yes, I took another look at the original post and realized I’ve bought some parts from them myself ☺️ 1 Link to comment Share on other sites More sharing options...
B Jake Moran Posted February 17, 2022 Share Posted February 17, 2022 16 hours ago, RR20 said: I need a 1936 Buick century rear passenger door, both headlamps and the back glass Same as Special I believe. Google RPM for faster results. I have been to the yard, but it's been years. As usual with these old posts brought back to life, it is fun and sad to see regular posters from years past we have not heard from since. 1 Link to comment Share on other sites More sharing options...
RR20 Posted February 18, 2022 Share Posted February 18, 2022 I tried calling the number listed on the original post 1(888) 223-1864 but it say that “that number cannot be reached”, I googled RPM but have gotten a whole bunch of sites none them the salvage yard. Appreciate it if anyone have any up to date info on them. Thanks Link to comment Share on other sites More sharing options...
Bloo Posted February 18, 2022 Share Posted February 18, 2022 Try "rpm motorsports parts albert lea minnesota" on google. You'll find phone numbers like (507) 377-1138 but google says it's permanently closed. I'd call and see. If it doesn't work out, I would try to see what Dave Tachney has. He's a real good bet. Phone only. Contact info and particulars here: https://forums.aaca.org/topic/366957-1937-1938-buick-headlight-bezels-trim-rings/ If none of that works out, there is also French Lake auto Parts in Minnesota. Link to comment Share on other sites More sharing options...
retirednow Posted February 18, 2022 Share Posted February 18, 2022 9 hours ago, Bloo said: Try "rpm motorsports parts albert lea minnesota" on google. You'll find phone numbers like (507) 377-1138 but google says it's permanently closed. I'd call and see. If it doesn't work out, I would try to see what Dave Tachney has. He's a real good bet. Phone only. Contact info and particulars here: https://forums.aaca.org/topic/366957-1937-1938-buick-headlight-bezels-trim-rings/ If none of that works out, there is also French Lake auto Parts in Minnesota. RPM Motorsports is still around. I just got an email from eBay today listing some of their items for sale 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now