Chris Coon Posted November 10, 2013 Share Posted November 10, 2013 This Clum switch is a little different than the ones I've seen. CLUM 10738How about $175 and I'll ship it Chris860-248-1102 Link to comment Share on other sites More sharing options...
keiser31 Posted November 10, 2013 Share Posted November 10, 2013 Must be one that does not use cowl lamps. Link to comment Share on other sites More sharing options...
Chris Coon Posted November 11, 2013 Author Share Posted November 11, 2013 Right, and there is a locating tab instead of a bracketany thoughts of application? Link to comment Share on other sites More sharing options...
keiser31 Posted October 19, 2014 Share Posted October 19, 2014 (edited) Right, and there is a locating tab instead of a bracketany thoughts of application?I know....it's been almost a year. I had the information about this the whole time, I just did not know it. The switch is for a 1929 Chrysler Model 65, Model 75 and 80-L. Edited October 19, 2014 by keiser31 (see edit history) Link to comment Share on other sites More sharing options...
Chris Coon Posted October 20, 2014 Author Share Posted October 20, 2014 Thanks John, much appreciated . I know these are getting a little scarce, hopefully someone can use it Link to comment Share on other sites More sharing options...
Mark Gregory Posted October 20, 2014 Share Posted October 20, 2014 I got this off the Jalopy Journal if it helps you . Trivia...The Clum switch co of Milwaukee, Wisc...since 1914.Made switches for the OX-5 powered airplanes, but there were no keys. On the switch it would read..Off..L...R...BothThey did make switches for the Dodge Brothers co., from 1914 up to 1930. Both light switches and ignition switches. Since your switch reads "Mag" and "GN". then obviously it was the run and kill switch for something that ran with a magneto. (Can't help you there if the Dodge Bro's cars had magneto's. I'm old, but not that old to know!!!!)Seems like Clum made switches for about anything, or at least they were used for about anything and everything.The Clum switches were also used in the 1920's and 30's Chris-Craft runabout boats and the Garwood runabouts.The Clum switch also showed up on the Harley Davidson Topper scooter. It was a on and off switch for the magneto.Usually on the early light switches they would read DIM...Off...On.. They also had a key in them.Of course on Evil bay, Clum switches do show up from time to time in for various applications. Link to comment Share on other sites More sharing options...
keiser31 Posted October 20, 2014 Share Posted October 20, 2014 Clum switches were made for the Dodges through 1932 at least. My book shows that. The switch in question here is a light switch only (not for ignition) that goes at the lower end of the steering column. Link to comment Share on other sites More sharing options...
30DodgePanel Posted October 20, 2014 Share Posted October 20, 2014 Clum switches were made for the Dodges through 1932 at least. My book shows that. The switch in question here is a light switch only (not for ignition) that goes at the lower end of the steering column.John, just curious,,, what is your source of reference ? I have a Clum catalog that has listings dated Feb 1, 1928 but I show nothing that goes up to 10738. The highest mine goes is 10725 for a Star application. Link to comment Share on other sites More sharing options...
keiser31 Posted October 20, 2014 Share Posted October 20, 2014 Actually, I see in my book that Clum switches are used up through 1934....maybe further if I search some more. The book I use is the "National Service Manual". It has LOTS of information in it. The copyright is 1937. Here is the book and a sampling of the information....There is one of these books on Ebay right now.... Link to comment Share on other sites More sharing options...
30DodgePanel Posted October 20, 2014 Share Posted October 20, 2014 Thank you sir...Off topic:I've been looking for a wiring diagram for my 1930 DA-124 3/4 ton panel truck. Do you see any electrical source referencing in there for it by chance ? I've contacted some of the sellers over the last year but no one can seem to answer that question. I would love to purchase one but I need to know if it's what I need first. Link to comment Share on other sites More sharing options...
roysboystoys Posted October 20, 2014 Share Posted October 20, 2014 Actually, I see in my book that Clum switches are used up through 1934....maybe further if I search some more. The book I use is the "National Service Manual". It has LOTS of information in it. The copyright is 1937. Here is the book and a sampling of the information....There is one of these books on Ebay right now....I worked at an Electrical/ ignition shop in the 60's. They subscribed to " National Service Manual". That is what allowed usto be " Specialists" . Unbelievable amount of info in them. Link to comment Share on other sites More sharing options...
keiser31 Posted October 20, 2014 Share Posted October 20, 2014 I see a wiring diagram for the DA6 passenger cars. I don't think this book has truck information in it. Link to comment Share on other sites More sharing options...
30DodgePanel Posted October 20, 2014 Share Posted October 20, 2014 (edited) I see a wiring diagram for the DA6 passenger cars. I don't think this book has truck information in it.I wonder why trucks aren't covered in these ? Any idea where I can find a diagram ? Edited October 20, 2014 by 30DodgePanel (see edit history) Link to comment Share on other sites More sharing options...
keiser31 Posted October 20, 2014 Share Posted October 20, 2014 You might try Irv Bishko. He has a LOT on information and books....http://www.autobooksbishko.com/ Link to comment Share on other sites More sharing options...
roysboystoys Posted October 20, 2014 Share Posted October 20, 2014 I wonder why trucks aren't covered in these ? Any idea where I can find a diagram ?I hate to steal this guys For Sale post , but if you check to see if the charging system has the same parts as a car ,you should have no problem using a car diagram. Very simple circuits. Link to comment Share on other sites More sharing options...
30DodgePanel Posted October 20, 2014 Share Posted October 20, 2014 (edited) I hate to steal this guys For Sale post , but if you check to see if the charging system has the same parts as a car ,you should have no problem using a car diagram. Very simple circuits.Yes, I apologize to the original poster but hard to take advantage of these opportunities when they arise, hopefully you all understand. As for the car and trucks being the same, my truck has a couple of accessories not on the passenger cars. Interior cargo light and dash lights so I didn't know if that made a difference. I know nothing about electrical and want to get it right...Thanks John, I've tried Irv, Faxon, Autolit and others but everyone seems to have the same items that do not cover the diagram I need. Thanks guys, I'll keep searching. I'm sure the info is out there somewhere... Edited October 20, 2014 by 30DodgePanel (see edit history) Link to comment Share on other sites More sharing options...
keiser31 Posted October 20, 2014 Share Posted October 20, 2014 The closed cars sometimes have a dome light and usually have a dash light. Link to comment Share on other sites More sharing options...
Chris Coon Posted October 21, 2014 Author Share Posted October 21, 2014 Trust me guys, no harm, no foul as far as Im concerned. This forum is a wealth of information, and Keiser is a big part of it Link to comment Share on other sites More sharing options...
30DodgePanel Posted October 21, 2014 Share Posted October 21, 2014 (edited) The closed cars sometimes have a dome light and usually have a dash light.Thanks John.I went ahead and purchased one of the Data books from 1936 in very rough condition today and if it doesn't have what I'm looking for at least I can look at the pictures...I figured for $60 it was worth ithttp://www.ebay.com/itm/390939736027?_trksid=p2060778.m2749.l2649&ssPageName=STRK%3AMEBIDX%3AITThanks Chris for your understanding. Edited October 21, 2014 by 30DodgePanel (see edit history) Link to comment Share on other sites More sharing options...
stakeside Posted October 22, 2014 Share Posted October 22, 2014 Thanks John.I went ahead and purchased one of the Data books from 1936 in very rough condition today and if it doesn't have what I'm looking for at least I can look at the pictures...I figured for $60 it was worth ithttp://www.ebay.com/itm/390939736027?_trksid=p2060778.m2749.l2649&ssPageName=STRK%3AMEBIDX%3AITThanks Chris for your understanding.Check my previous thread:http://forums.aaca.org/f143/28-truck-wire-diagram-292989.htmlthis the Clum for my 29 DB truck. Model 889. Has similar terminals but a different mounting.Is there a reference to this in the Data book?Dave will send a e mail to you. Link to comment Share on other sites More sharing options...
keiser31 Posted October 22, 2014 Share Posted October 22, 2014 Unfortunately, my books do not cover the truck light switches or diagrams. Link to comment Share on other sites More sharing options...
stakeside Posted October 22, 2014 Share Posted October 22, 2014 Thanks for checking. The journey and adventure continue. Link to comment Share on other sites More sharing options...
30DodgePanel Posted October 22, 2014 Share Posted October 22, 2014 Check my previous thread:http://forums.aaca.org/f143/28-truck-wire-diagram-292989.htmlthis the Clum for my 29 DB truck. Model 889. Has similar terminals but a different mounting.Is there a reference to this in the Data book?Dave will send a e mail to you.Received your email..That Clum number seems low to me. Are you sure there isn't more to the number ? Shoot me a photo of the back of it if you can or post it here as I think Chris the original poster is ok with that. If you don't feel comfortable with that then maybe start a new thread discussing Clum switches so we can all get some collective help.. Link to comment Share on other sites More sharing options...
keiser31 Posted October 23, 2014 Share Posted October 23, 2014 That number seems low to me, too. I see no Clum switches at all in my book with only 3 digit numbers. Link to comment Share on other sites More sharing options...
stakeside Posted October 24, 2014 Share Posted October 24, 2014 Posted new thread in "Technical" section on "Clum Lite Switch" Link to comment Share on other sites More sharing options...
Tim Wolfe Posted November 6, 2014 Share Posted November 6, 2014 Thank you sir...Off topic:I've been looking for a wiring diagram for my 1930 DA-124 3/4 ton panel truck. Do you see any electrical source referencing in there for it by chance ? I've contacted some of the sellers over the last year but no one can seem to answer that question. I would love to purchase one but I need to know if it's what I need first.Have you contacted any companies that reproduce wiring for antique cars? Rhode Island Red for example... Link to comment Share on other sites More sharing options...
30DodgePanel Posted November 7, 2014 Share Posted November 7, 2014 Have you contacted any companies that reproduce wiring for antique cars? Rhode Island Red for example...I have located a wiring diagram, I had one all along and didn't realize that I'd misplaced it...., thanks to all that helped and sorry for wasting everyone's time on this. Link to comment Share on other sites More sharing options...
Calm Posted January 4, 2022 Share Posted January 4, 2022 Chris Coon I know this is a very old post but was wondering if you still had the switch. Thanks Cal Muilenburg Link to comment Share on other sites More sharing options...
Chris Coon Posted February 5, 2022 Author Share Posted February 5, 2022 Sorry Cal, I traded it at Hershey a few years back. If you do a search for Hattie’s Garage in MD, Rob may be able to help. He has some early Chrysler stuff good luck Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now