Guest Russ Williams Posted September 5, 2013 Share Posted September 5, 2013 Thanks Chris! It is nice to take a breath. Yesterday was the first "day off" I have taken in a while that I wasn't spent working every available minute on the old girl. We really feel like we have accomplished something by getting her going. We have officially now put more miles on her than she had driven from at least 1986 to our purchase a little over a month ago. Another Buick is back on the road! Link to comment Share on other sites More sharing options...
Guest Russ Williams Posted September 5, 2013 Share Posted September 5, 2013 Just an FYI, There is a '64 Electra 225 Convertible that just went up for sale in California. Looks like a pretty straight driver. Here is it's video: 1964 Buick Electra 225 - YouTube Link to comment Share on other sites More sharing options...
smithbrother Posted September 5, 2013 Share Posted September 5, 2013 You must have hit the 4-legged dear at the outside tip of the fender, lots of strength there. You could probably hit that part with a sledge, and not dent such. MAYBE......LOLLooking good, 'the car', NOT the deer.Dale in Indy Link to comment Share on other sites More sharing options...
Guest Russ Williams Posted September 6, 2013 Share Posted September 6, 2013 For anyone interested in coverage of GREASERAMA that is not focused on Bertha, here is that video: Link to comment Share on other sites More sharing options...
smithbrother Posted September 6, 2013 Share Posted September 6, 2013 Kool, FOR SURE, but I didn't see any SCALLOPS THOUGH.......sad, what's this world coming to???Dale in Indy Link to comment Share on other sites More sharing options...
Guest Russ Williams Posted September 6, 2013 Share Posted September 6, 2013 There are a few in that video, but the images move fast. Just for you Dale: Link to comment Share on other sites More sharing options...
smithbrother Posted September 6, 2013 Share Posted September 6, 2013 The WORLD hasn't gone to pot after all, YOU have restored my faith, LOL.Dale in Indy Link to comment Share on other sites More sharing options...
JohnD1956 Posted September 7, 2013 Share Posted September 7, 2013 Looks like all had a lot of fun. That's what the hobby is about. Thanks for posting the video Link to comment Share on other sites More sharing options...
dei Posted September 8, 2013 Share Posted September 8, 2013 You are right Doug! I knew the minute the Barn Door opened that I was buying it. My wife has even pitched in (I work 12 hour days as a Car Salesman). She watched me clean, condition, dye and restore the leather on the passenger side seat back. Of her own volition, she spent all day today restoring the leather inserts! She is PROUD! Posted 20 some pics on her Facebook. I am still gonna need to get the seats re-foamed and a couple of seams repaired, but it is definitely presentable!Here is a before and after:Russ,Two things:1st, You are so lucky to have a woman who gets in there to help like Shadetree and a few others have too!2nd, The reason I knew you had that insight what the car would or could be under all that dirt in the dark is because...I see this,For my big Buick some day too (just not in a month like you though) ....Sure looks like you are doing it right and having fun as you go! Link to comment Share on other sites More sharing options...
Guest Russ Williams Posted September 16, 2013 Share Posted September 16, 2013 GORGEOUS '58 Doug!Hey, I do need a little assistance. I mentioned the vacuum leak from the inspection plate. Well, that entire plate was completely gone. I cut a piece of metal to fit and "J-B Welded" it in place. It lasted about 100 miles before it blew out. So, what it the proper way to replace the inspection plate so I don't have to do this a third time?Thanks,Russ Link to comment Share on other sites More sharing options...
Smartin Posted September 16, 2013 Share Posted September 16, 2013 I'm guessing that the "inspection plate" you're referring to on the bottom side of the intake is the big round plug just under the carburetor?If so, then you can get a replacement plug from one of the Buick vendors. It doesn't pull vacuum, though. It covers the exhaust crossover, and there will be a large exhaust leak if it is rusted through/cracked/broken. You can also try to find a replacement intake. Link to comment Share on other sites More sharing options...
Guest Russ Williams Posted September 17, 2013 Share Posted September 17, 2013 Well, that explains why it still runs with a two inch round hole in the intake. Thank you.All stock Buick "Nailhead" intake manifolds will have this "inspection plate", correct? So I might as well just fix mine correctly.I assume these go in like freeze plugs? Any additional knowledge one might like to share to insure it stays in?Thanks!Russ Link to comment Share on other sites More sharing options...
Smartin Posted September 18, 2013 Share Posted September 18, 2013 Correct...I have never had the pleasure of having to replace mine, but I do have one sitting in the basement. From what I hear, it is similar to a freeze plug. Maybe someone who has replaced theirs can chime in with some wisdom as to if any sort of sealant is needed. Link to comment Share on other sites More sharing options...
dei Posted September 20, 2013 Share Posted September 20, 2013 Russ,Waaay back, my '58 Special w/ 2 barrel carb blew out that cover. I thought I had blown the engine! Found the plug laying on the valve lifter cover so took off the intake and it was suggested that it be tack welded back in. That sorta worked for about 100 miles and it just blew again so... ended up going to the local auto wreckers (yes there were still 58's in there then) bought a used intake and it is still OK today (so far). Good luck with a sealant due to the high exhaust heat and pressure. Because it is like a frost plug, maybe with a hydraulic press and the right setup one could carefully try and press it back in but... then again, what do you have to loose by trying it? A couple of gaskets and your time....Let us know how it goes. Again, she sure looks good! Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now