chrysler49 Posted July 20, 2013 Share Posted July 20, 2013 My 1949 Windsor with the 251 Spitfire runs well, but after driving a decent distance and shutting off the engine it has trouble starting until i've let it cool for a good 20 or more minutes. From what I have seen it sounds as though my starter heat shield is missing and perhaps causing me issues, and I really am not seeing any sort of shield around the starter. My manual hasn't really helped me to specify what it should look like and where exactly it attaches. Anyone have information on the shield and perhaps where I can order the exact part I need. Link to comment Share on other sites More sharing options...
Rusty_OToole Posted July 20, 2013 Share Posted July 20, 2013 I don't think they had a starter heat shield but they did have a fuel pump heat shield. It is a strip of sheet steel about 8" long and 3" wide, bent into a J shape, that goes between the starter and exhaust manifold. Link to comment Share on other sites More sharing options...
chrysler49 Posted July 23, 2013 Author Share Posted July 23, 2013 Turns out my fuel pump shield is there. Got new brushes for my generator and a kit for my carb, so we'll see the difference those make. Link to comment Share on other sites More sharing options...
Rusty_OToole Posted July 25, 2013 Share Posted July 25, 2013 Does the starter turn slowly when hot? Could be a sign it is due for a rebuild. Link to comment Share on other sites More sharing options...
chrysler49 Posted July 25, 2013 Author Share Posted July 25, 2013 It seems to struggle more when warm as opposed to cool. Is a starter rebuild something I could do with mild mechanic abilities? I guess I'm not sure if rebuild kits for starters are available as they are for carbs.... Link to comment Share on other sites More sharing options...
Rusty_OToole Posted July 28, 2013 Share Posted July 28, 2013 (edited) It is usually best to take it to a local auto electric shop or starter and alternator rebuilder. They are located all over the country, there should be several near you. Call around and ask if they can rebuild a 1949 starter, most can. If you live in Iowa farming country they routinely rebuild starters and generators for old tractors and equipment.We used to fix them up at home but you need the right tools to do a proper job.Incidentally my local rebuilder does twice as good a job as the typical parts store rebuilt, and charges half or less what they do. Should be around $100. You can ask for an estimate. This is if you take the starter off and deliver it to their shop.Time to do the rebuild, a couple of hours (including waiting for the paint to dry) but it may take several days before they get to it. Especially if they are good and don't charge too much.You could ask your local mechanic or old car friends where they send their starters alternators and generators. Edited July 28, 2013 by Rusty_OToole (see edit history) Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now