Guest roadmaster56 Posted May 12, 2013 Share Posted May 12, 2013 I've got a leakat the rear of my gearbox; 48 New Yorker with Fluid Drive (see photo below) The leak is not in the Fluid Drive unit, but the 4 speed gear box at the rear most housing, just ahead of the parking brake. This housing is made up of two pieces - one bolt on to another to make up the rear of the gear box. The leak is confined to the larger housing and gasket.The oil collects at the bottom of the built in oil strainer and it leaks onto the parking brake/shoes.I have removed the strainer cover and replaced the seal - and its not leaking. Has anyone removed the rear housing? If so, what should I expect? Are springs and things going to fly out or is this an easy job where the cover comes off and the new gasket goes on?Thanks,David in Santa Cruz. Link to comment Share on other sites More sharing options...
c49er Posted May 13, 2013 Share Posted May 13, 2013 (edited) Here is what you will see after taking it apart. That rear housing has the speedo pinion gear and oil pump inside. You will have to replace the rear seal and cover gasket.Bob Edited May 13, 2013 by c49er (see edit history) Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now