Jump to content

1929 Stutz reverse lockout cable


Guest autofi

Recommended Posts

Guest autofi

My question is what is needed to access the reverse lock-out cable passing through the shift lever?

The pull cable is not preventing from engaging reverse accidently.Also does someone have a pic of the hardwire that retains the emergency brake drum at the rear of the transmission?

Thanks.

Link to comment
Share on other sites

I think what you're referring to is not the reverse lockout. If your car has the Detroit Gear 4 speed, to engage the first gear stump puller gear you have to pull up on the flange below the shifter knob and move the sifter to the far left and towards the dash. You cannot access this gear while the car is moving, only when at a dead stop. You will never use this gear while normally driving the car. There is no reverse lock out on these transmissions. And what passes through the shift lever is a solid rod, not a flexible cable.

Edited by K8096 (see edit history)
Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...