Metz Pedal Springs

I think I found an nearly-exact match for the large extension coil springs Metz used on the two pedals: McMaster-Carr 9413K652 . These are stainless steel, but could be blackened. My 1913 has the original springs, but they were slightly deformed (see photo; original spring on top).

Phil

Thanks for posting the part number!!

Phil, I just looked on the reference page for the springs you recommend. I can not find that exact number. I do find a couple of similar numbers though. I am presuming that the spring needed is the 9413K62 which is a 6.5 inch length spring. Before I order I would like your confirmation. Thanks again for the assistance and for posting the source of the needed springs. Very grateful!Jerry

You're correct. It's 9413K62.

Phil

You're correct. It's 9413K62.

Phil

When I try that on McMastercarr.com I get a 7" High Temp expansion joint.

I think the part number might be: 94135K62

Possible McMaster Carr's website returns different results for different regions??

94135K62, according to my order in August 2012.

Phil

94135K62, according to my order in August 2012.

Phil

That checks out for me as well. I've gone ahead and placed an order.