help me identify this 1926 chysler

Hi,

i have just got a 1926 chysler for restoration

engine no is G 167560

so its clearly a 25 or 26 chrysler 70

what i cant understand is how to decode the vin number and what its significance in regards to exact model andstyle of this vehicle

vin number clearly reads as

A W 4 3 5 S

thank you ,

regards,

Allan Almeida

It is a Canadian built Model 70 ( serial numbers were AW100P - AW568W ).

We need to see what you got. Do you have any other photos of it for our "drool factor"?

this isthe 26 chrysler

need lots of body parts and fittings

where should i start searching ?

radiator grill surround trim and headlamps needed as well

mechanically we have just finished restoring her

Yeah, love it, good luck with that! Jealous of that Walter Chrysler Plate, wish mine had something that pretty on it!What are those tyres though, they are BIG! Off roading in mind?

What are those tyres though, they are BIG! Off roading in mind?

those tires were put on just to get the car off the stands. have ou the original size on now

Interesting body..................looks to be cobbled up...........but nice!

[ATTACH=CONFIG]226814[/ATTACH][ATTACH=CONFIG]226815[/ATTACH] i am in the same boat..to confirm which model...vehicle in storage but will ask a friend to check on engine number etc..

keith123451@live.com

That dashboard look like 1927 to me. The rectangular FEDCO plate on the dashboard will tell.

With no fuel gauge on the dash this would be a 4 cylinder Model 50 or 52.

KMS. 28 Chrysler could be right as I did not see the engine area. If you have 6 bolt wheels/rims then it is an early series 60. They used the same dash as an early Chrysler 4 and the 50/52 series. Also the headlights are typical of the early 26 60 series. pm me and I will email you some photos of my original unrestored early 60 series touring. Rob hattiesgarage@comcast.net