dneivandt Posted February 26, 2012 Share Posted February 26, 2012 I am looking for lock rings for 18" wheels that I believe were made in Canada (but the design may have also been used by US manufacturers). Note that the cut-out is set back 1" from the end, and is 5/8" long. Any help would be greatly appreciated.Thank you,David Link to comment Share on other sites More sharing options...
alsfarms Posted July 29, 2012 Share Posted July 29, 2012 Hello David, Do you absolutely need the lifting notch in the location as per your pictures? Also, would you please send me a picture of the full wheel? I will look to see if I have any 18" wheels and or lock rings. I can think of one wheel and lock ring that I have suspected to be Late 20's early 30's Chrysler product. Also include the lug bolt spacing so I can verify what I have.Regards,Alan Link to comment Share on other sites More sharing options...
John_Mereness Posted July 29, 2012 Share Posted July 29, 2012 I am looking for lock rings for 18" wheels that I believe were made in Canada (but the design may have also been used by US manufacturers). Note that the cut-out is set back 1" from the end, and is 5/8" long. Any help would be greatly appreciated.Thank you,DavidI have one available that was an extra for my 1931 Cadillac 355B Town Sedan. It does need replated, though it has tons of original chrome and only mild pitting (ie. why I kept is as a spare as I knew if I ever needed one this was the one I needed). Cincinnati, OH johnmereness@aol.com 513-478-1887 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now