Guest Low-Blow Posted November 11, 2011 Share Posted November 11, 2011 I am brand new to this forum and would like to get some help in identifying this horn and how I might test it to see if it works. Any input you have would be helpful. Thank you in advance. Link to comment Share on other sites More sharing options...
Bleach Posted November 11, 2011 Share Posted November 11, 2011 Looks like a Model A horn. Do not use a power source with more than 6V to test it. Link to comment Share on other sites More sharing options...
Dave Mellor NJ Posted November 12, 2011 Share Posted November 12, 2011 Look closely around the flange. you should see a faint "Sparton" stamped in. Try to see if the armature turns easily. If the diaphragm is good you will start to hear the "ahooga". Then check the brushes and commutator. If it all looks good try to put 6 volts to it as bleach said. there are screws for adjustment on the top. If it works clean it up, paint it and buy an easily available housing and you have a nice horn worth $150-200. Link to comment Share on other sites More sharing options...
Dave Henderson Posted November 12, 2011 Share Posted November 12, 2011 In addition to Sparton, 4 other makers produced horns for the Model A Ford at some period during its production. They were; Stewart-Warner, GIM, E. A. Labratories, and Ames. It is not uncommon to find a horn made up from parts of different makes, as most parts interchange and they often got swapped around over the years. Articles have appeared in Model A club literature showing pictures of each make, with its distinguishing features and markings. Link to comment Share on other sites More sharing options...
Dave Mellor NJ Posted November 13, 2011 Share Posted November 13, 2011 Sparton was by far the most common, all the others were early. That's why I suggested looking for the sparton imprint Link to comment Share on other sites More sharing options...
Dave Henderson Posted November 13, 2011 Share Posted November 13, 2011 Dave, Sparton was perhaps the most used of all the horns. Haven't ever seen statistics on this or know if such exists. Not to be a nitpicker however, this from the Model A Judging Standards published jointly by MARC and MAFCA regarding the application span for each of the 5 Model A horns; Sparton '27-'31, ( The Model A was introduced in December, 1927) Stewart-Warner Mid '28-'31, E. A. Labs '27-'29, Ames '27-early'30, G.I.M. mid '28-'31. Link to comment Share on other sites More sharing options...
drwatson Posted November 14, 2011 Share Posted November 14, 2011 Here's a discussion at "ford barn" forum for different brand model "A" horns; I'm amused at the number of different opinions on sound quality. Model A horns - The Ford Barn Link to comment Share on other sites More sharing options...
Dave Mellor NJ Posted November 15, 2011 Share Posted November 15, 2011 Sorry if I'm spreading bad information. It just seems most of the As I see have the Sparton. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now