Guest bshbngr Posted July 11, 2011 Share Posted July 11, 2011 Hi Guys, I joined this forum to hopefully find some insight on my Chrysler 413 short block still in the factory crate and plastic wrap. I am interested in selling it but I have no idea what it is worth nor do I know what particulars a buyer would want to know i.e. (serial #, cast #, etc.) any help would be greatly appreciated.Stevens Link to comment Share on other sites More sharing options...
keiser31 Posted July 11, 2011 Share Posted July 11, 2011 Hi Guys, I joined this forum to hopefully find some insight on my Chrysler 413 short block still in the factory crate and plastic wrap. I am interested in selling it but I have no idea what it is worth nor do I know what particulars a buyer would want to know i.e. (serial #, cast #, etc.) any help would be greatly appreciated.StevensThis guy could probably tell you what you need to know...Tom at sehloff_mopars@yahoo.com. Link to comment Share on other sites More sharing options...
NTX5467 Posted September 3, 2011 Share Posted September 3, 2011 There should be a Chrysler part number stamped on the "crate" or cardboard shipping box.Many 413s were used in industrial applications, as stationary irrigation pump motors. Plus in the heavier-duty Dodge trucks. The truck, motor home, and industrial versions would probably have a 9.0 to 1 compression ratio (or slightly lower), whereas the car versions were all about 10.5 to 1 compression ratio. This would have been with the small chamber R/RB cylinder heads. Pistons were usually where the compression ratio was changed, due to the lower compression ratio having a "deeper" deck height for the piston at TDC.Regards,NTX5467 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now