Jump to content

53 Buick Solid Spoke Steering, horn components


Guest Irl

Recommended Posts

53 Buick Solid Spoke Steering, horn components help

Anyone had experience with this? There are some missing pieces, that don't seem to be manufactured anymore. I believe I am missing:

1. some kind of spring under the horn cup (attaches to plastic steering wheel housing and pushes up the cup.

2. a strap that goes on top of the horn button piece connected to the wire. It is called a retainer in other horns, and might be a few pieces, a strap with a retainer on each side.

Anyone have a pic on the missing parts or a lead? Have searched and called some.

Any universal kit that will do the trick?

The insides were all wrapped with electrical tape to keep the horn from activating all the time.

Thanks.

post-75217-143138520698_thumb.jpg

post-75217-143138520701_thumb.jpg

post-75217-143138520704_thumb.jpg

Link to comment
Share on other sites

Guest 38cadillacjack

instead of a spring,you can use a section of foam pipe insulation.cut to a length just longer than you think.then if it tends to pop horn cap off,you can shorten it.i have used this on several cars.

Link to comment
Share on other sites

I will try this. I'm thinking it must go close to the inside (around the steering wheel nut) and leave the outside edge of the cup for connecting? Appreciate your help.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...