Jump to content

Free SE parts!


Guest SteveB

Recommended Posts

If anyone needs SE parts, I have a chicken coop full of them. They are for the most part sedan parts. Email me at wileye@sonic.net

<link rel="File-List" href="file:///C:%5CDOCUME%7E1%5CSTEVEB%7E1%5CLOCALS%7E1%5CTemp%5Cmsohtml1%5C01%5Cclip_filelist.xml"><!--[if gte mso 9]><xml> <w:WordDocument> <w:View>Normal</w:View> <w:Zoom>0</w:Zoom> <w:PunctuationKerning/> <w:ValidateAgainstSchemas/> <w:SaveIfXMLInvalid>false</w:SaveIfXMLInvalid> <w:IgnoreMixedContent>false</w:IgnoreMixedContent> <w:AlwaysShowPlaceholderText>false</w:AlwaysShowPlaceholderText> <w:Compatibility> <w:BreakWrappedTables/> <w:SnapToGridInCell/> <w:WrapTextWithPunct/> <w:UseAsianBreakRules/> <w:DontGrowAutofit/> </w:Compatibility> <w:BrowserLevel>MicrosoftInternetExplorer4</w:BrowserLevel> </w:WordDocument> </xml><![endif]--><!--[if gte mso 9]><xml> <w:LatentStyles DefLockedState="false" LatentStyleCount="156"> </w:LatentStyles> </xml><![endif]--><style> <!-- /* Style Definitions */ p.MsoNormal, li.MsoNormal, div.MsoNormal {mso-style-parent:""; margin:0in; margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:12.0pt; font-family:"Times New Roman"; mso-fareast-font-family:"Times New Roman";} @page Section1 {size:8.5in 11.0in; margin:1.0in 1.25in 1.0in 1.25in; mso-header-margin:.5in; mso-footer-margin:.5in; mso-paper-source:0;} div.Section1 {page:Section1;} --> </style><!--[if gte mso 10]> <style> /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Times New Roman"; mso-ansi-language:#0400; mso-fareast-language:#0400; mso-bidi-language:#0400;} </style> <![endif]-->

SE PARTS LIST<o></o>

For any model. Those for sedan only are marked (sedan)<o></o>

Door Latch Control (sedan). Both rear doors only.<o></o>

Rear Seat Arm Rests (sedan). Some corrosion. Original upholstery in fair shape.<o></o>

Front Seat Frame (sedan). Some corrosion, but restorable.<o></o>

Seat Backs (sedan). Complete. Rear in really good shape. Front upholstery has rot out at bottom. Springs OK.<o></o>

Interior Window Trim (sedan). Good shape. Windshield trim missing.<o></o>

Center Stainless Steel Exterior Trim at Rear Window (sedan).<o></o>

Rear Axle (sedan). Housing and carrier separate or together. Both somewhat eaten by road salt, but useable.<o></o>

Seat Rails with shaft. Mounting feet are corroded, need to be rebuilt.<o></o>>

Steering Wheel with Horn Button. Some minor cracks but in pretty good shape.<o></o>

Water Tank.<o></o>

Rear Exhaust Pipe Hanger. Somewhat eaten by road salt.<o></o>

Rear Exhaust Pipe Hanger bracket. Bolts on to frame.<o></o>

Lower Battery Box. Tray pretty much eaten up, but can be rebuilt.<o></o>

Windshield Hinges.<o></o>

Glovebox Door. Two instrument cutouts, but restorable.<o></o>

Front Axle. Thrust bearing surfaces need to be built up and refinished. Otherwise, excellent condition.<o></o>

Springs. No coverings. Some bronze discs missing. May need to be rearced.<o></o>

Steering Gear, Shaft, Tube and Drag Link. Excellent condition. Later model; larger diameter shaft.<o></o>

Cowl Vents with Controls. Excellent condition. Later model with lever type controls.<o></o>

Front Wheel Backing Plates. Good condition.<o></o>

Brake and Clutch Pedal Assembly. Good condition.<o></o>

Hand Brake Good condition.<o></o>

Gas Tank Straps. Includes tank hangers over the tank. Excellent condition.<o></o>

Accelerator Cross Shaft.<o></o>

Speedometer. Fair condition. Glass is missing.<o></o>

Instrument Cluster. Good condition. Water temperature is missing.<o></o>

Steering Shaft Firewall Plate.<o></o>

Battery Box Long Bolts.<o></o>

Door Scuff Plates (sedan). Definitely not show or restoration quality, but useable, very rough. Needs finishing washers on a few of the holes.<o></o>

Doors (sedan). Pretty fair shape. Bottom rust out to various degrees. Restorable.<o></o>

Left Front Fender. Rough but restorable.<o></o>

Rear Fenders (sedan). Rough but restorable.<o></o>

Sway Bar. Excellent condition but somewhat eaten by road salt.<o></o>

Wiring Harness. Some ends and netting missing. Can be used if you're willing to inspect each wire to eliminate shorts. Definitely not show quality.<o></o>

Center Tunnel. From transmission cross bar back. No front. Rear tunnel long enough for sedan, but not coupe. Piece cut out in hand brake area.<o></o>

Headliner Trim (sedan). Front missing.<o></o>

Front Floor Board. A few, not much good for anything, maybe patterns.<o></o>

Stainless Steel Door Trim (sedan). Three pieces (only three doors).<o></o>

Stainless Steel Body Trim (sedan). Behind rear door, one side only.<o></o>

Center Cowl Trim. Between windshield and hood.<o></o>

Gas Tank. Mostly corroded out. Filler neck and other parts in pretty good shape.<o></o>

Gas Tank Sender Cap. To put a modern sender in an original cap.<o></o>

H Strut. Between dash and firewall.<o></o>

Gas line springs. A little road salt eaten, but not bad.

Link to comment
Share on other sites

  • 2 weeks later...

Hi Wiley

My name is Reg and I have a chrysler cu. I need a front right brake slave cylinder, not sure if the se is the same as the cu but I know some parts are interchangeable, need to check. I am from Australia and am happy to pay handling and shipping costs if you have one and if it is interchangeable.

Thanks

Reg:)

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...